Samsung CRT Television CL 29Z30, CL 29Z40 User Guide

1 Audio/Video Output Jacks  
Connection Panel (depending on the model)  
Connect to the audio/video input jacks of a recording VCR.  
COLOR TELEVISION  
The product color and shape may vary depending on the  
model.  
2 Audio/Video Input Jacks  
CL-29Z30/29Z40/29Z50/  
29Z57/29Z58  
Connect to the audio/video output jacks of VCRs, DVD players  
and similar devices.  
Rear Jack  
3 Component Video Input Jacks (Y, PB, PR)  
Connect to the Component video outputs of a DVD or DTV  
set-top box. 480i video signal input is available.  
When using the Component Video input, connect audio jacks  
to “AV IN 2 (AUDIO-L/R)”.  
Owner’s Instructions  
Before operating, please read this manual carefully,  
and retain it for future reference.  
4 ANT IN  
Record your Model and Serial number.  
Connect to an antenna or to a cable TV system.  
3
▪ Model __________ ▪ Serial No. __________  
4
Side Jack  
Control Panel (depending on the model)  
2 3  
1
The product color and shape may vary depending on the  
model.  
1
1
Front Panel  
2
3
2
3
4
5
3
1
2
1
6
4
Please be sure to match the color coded input terminals  
and cable jacks.  
3
2
3
When both the side and rear jacks (AV IN 2) are  
connected to external equipment, the side receives  
priority.  
7
1 S-Video Input Jack  
1
2
3
4
5
6
7
Indicator (Standby or Timer)  
Remote control sensor  
Power on/off  
Input source selection  
On-screen menu display  
Volume adjustment  
Channel selection  
Connect an S-Video signal from a camcorder or video game.  
Whenever you connect an audio or video system to your  
television, ensure that all elements are switched off.  
Please be sure to match the color coded input terminals  
and cable jacks.  
2 Video Input Jack  
Connect a video signal from a camcorder or video game.  
3 Audio Input Jacks  
Connect audio signals from a camcorder or video game.  
continued...  
The 6and 7buttons also have the same function as the  
◄/►/▲/▼ buttons on the remote control.  
If the remote control no longer works or you have  
misplaced it, you can use the controls on the panel of the  
television.  
AA68-03806K-01  
English - 1  
 
Setup - Plug & Play  
Input - Source List / Edit Name  
Time  
When the TV is initially powered on, several basic customer  
settings proceed automatically and subsequently.  
The following settings are available.  
6
6
After all available channels  
are stored, the “Time” is  
displayed. Press the ENTER  
button. Press the ◄ or ►  
button to move to the hour  
or minute. Set the clock by  
pressing the ▲ or ▼ button.  
Source List  
You can switch between  
viewing signal from  
connected equipment, such  
as a VCR, DVD, set-top  
box, and the TV source  
(broadcast or cable).  
Source List  
Clock  
-- : -- am  
TV  
On Timer  
Off Timer  
Sleep Timer  
-- : -- am Off  
-- : -- am Off  
: Off  
AV1  
----  
----  
----  
----  
AV2  
1
2
3
Press the POWER button  
on the remote control.  
The message “Plug &  
Play” is displayed. It  
flickers for a little while and  
then Language menu is  
automatically displayed.  
S-Video  
Component  
On Timer Volume  
: 10  
Move Enter  
Return  
Move  
Enter  
Return  
Plug & Play  
Press the SOURCE  
button on the remote control repeatedly to select the  
desired signal source.  
When you have finished,  
press the MENU button.  
The “Enjoy your watching.”  
is displayed.  
Press the ◄ or ► button to  
select the language, then  
press the MENU button.  
The message “Ant input  
check” is displayed.  
Edit Name  
Setup  
Edit Name  
You can give a name to the  
external source.  
Enjoy your watching  
Plug & Play feature  
doesn’t work in the AV  
mode.  
----  
Time  
AV1  
:
:
:
:
VCR  
DVD  
Plug & Play  
Caption  
AV2  
Cable STB  
Sat. STB  
S-Video  
Component  
AVRecv.  
DVD Recv.  
Language  
More  
: English  
Game
Camcorder  
DVD Combo  
Adjust  
Skip  
Move  
Enter  
Return  
Re-setting the Plug & Play  
Method:  
MENU ▲/▼ (Setup)   
ENTER ▲/▼ (Plug & Play)  
ENTER  
Setup  
Time  
Make sure that the antenna  
is connected to the TV.  
Press the ENTER button,  
then the “Channel” is  
displayed.  
Plug & Play  
Caption  
Ant input check  
Auto Program  
Language  
More  
: English  
Move  
Enter  
Return  
Skip  
4
5
Press the ◄ or ► button to  
select “Air”, “STD”, “HRC”,  
or “IRC”, then the MENU  
button. The message “Auto  
Program” is displayed.  
Channel  
Auto Program  
Add/Delete  
Air/CATV  
Name  
: Deleted  
: Air  
:
----  
LNA  
: Off  
Adjust  
Skip  
Press the ENTER button to  
select “Start”. The TV will  
begin memorizing all of the  
available channels. Press the  
ENTER button to stop.  
Auto Program  
Air  
Start  
7
Enter  
Skip  
continued...  
English - 3  
 
Channel - Memorizing the Channels  
Channel - Name  
Channel - LNA (depending on the model)  
Your TV can memorize and store all of the available channels  
for both air and cable channels. After the available channels  
When a weak broadcast signal  
causes an unclear, noisy picture,  
the “LNA” feature improves the  
picture quality by setting to “On”.  
If you experience noise on a  
certain channel, set the “LNA” to  
“On” or “Off” for this channel, to  
obtain the optimum picture.  
Channel  
Use this feature to assign an  
easy-to-remember label to any  
channel (i.e., “CBS”, “ESPN”,  
“PBS2”, “CNN1”, etc.).  
A label consists of four fields,  
where each field is a letter  
(A~Z), a number (0~9), a blank,  
or -. When the INFO button is  
pressed, the channel label will  
appear next to the channel number.  
Channel  
Auto Program  
Auto Program  
Add/Delete  
Air/CATV  
Name  
Add/Delete  
: Deleted  
: Air  
are memorized, use the CH  
and CH  
buttons to scan  
: Deleted  
: Air  
Air/CATV  
through the channels.  
Name  
:
----  
This eliminates the need to change channels by entering the  
channel digits. There are three steps for memorizing channels:  
“Air/CATV”, “Auto Program” and “Add/Delete”.  
A
----  
:
LNA  
: O  
Off  
On  
LNA  
: Off  
Move  
Enter  
Return  
Move  
Adjust  
Return  
Air/CATV  
Channel  
Auto Program  
Add/Delete  
Air/CATV  
Name  
Before your TV can begin  
memorizing the available  
channels, you must specify  
the type of signal source  
that is connected to the TV  
(i.e., an antenna or a cable  
system). Select “Air”, “STD”,  
: Deleted  
: Air  
:
----  
LNA  
: Off  
Move  
Adjust  
Skip  
“HRC”, or “IRC” by pressing the ◄ or ► button.  
Auto Program  
All available channels are  
Auto Program  
automatically stored in  
Air  
Start  
7
memory when channels are  
selected by the direct tuning  
function.  
Enter  
Return  
Press the ENTER button  
at any time to interrupt the  
memorization process.  
Channel  
Add/Delete  
Auto Program  
Add/Delete  
Air/CATV  
Name  
You can add or delete  
a channel to display the  
channels you want only.  
To use the “Add/Delete”  
function, first run Auto  
Program.  
Deleted  
:
Added  
:Air  
:
----  
LNA  
: Off  
Move  
Enter  
Return  
Select “Deleted” or “Added”  
by pressing the ▲ or ▼ button.  
English - 4  
 
Setup - Time  
Setup - Caption  
Setup -  
Language / Blue Screen /  
Melody / Demonstration  
Clock  
Your TV decodes and displays  
the closed captions that are  
broadcast with certain TV shows.  
These captions are usually  
subtitles for the hearing impaired  
or foreign-language translations.  
All VCRs record the closed  
Caption  
: On ►  
Time  
12 : 00 am  
Caption  
Mode  
Clock  
Setting the clock is  
necessary in order to use  
the various timer features of  
the TV. Also, you can check  
the time while watching the  
TV. (Just press the INFO  
button.)  
: Caption  
On Timer  
Off Timer  
Sleep Timer  
-- : -- am Off  
-- : -- am Off  
: Off  
Channels  
Field  
: 1  
: 1  
Language  
Setup  
Time  
When you start using the TV  
for the first time, you must  
select the language which  
will be used for displaying  
menus and indications.  
On Timer Volume  
: 10  
Plug & Play  
Caption  
Language  
More  
Move Adjust  
Return  
Move  
Enter  
Return  
caption signal from TV programs,  
: English  
so home-recorded video tapes also provide closed captions.  
Most pre-recorded commercial video tapes provide closed  
captions as well. Check for the closed caption symbol in your  
TV schedule and on the tape’s packaging: CC .  
Move  
Adjust  
Return  
On Timer / Off Timer  
You can set the On/Off timers so that the TV will switch on  
or off automatically at the time you select.  
Blue Screen  
If no signal is being received or the signal is very weak,  
a blue screen automatically replaces the noisy picture  
background. If you wish to continue viewing the poor  
picture, you must set the “Blue Screen” to “Off”.  
You must set the clock first.  
Caption: On/Off  
You can activate or deactivate the “Caption” function.  
Sleep Timer  
Press the CAPTION button on the remote control  
repeatedly to select “On” or “Off”.  
Melody  
You can select a time period of between 30 and 180  
minutes after which the TV automatically switches to  
standby mode.  
You can hear melody sound when the TV is powered on  
or off.  
Mode  
Press the SLEEP button on the remote control  
repeatedly until the appropriate time interval appears  
(any of the preset values from “30 Min.” to “180 Min.”).  
Demonstration  
-
In “Caption” mode, captions appear at the bottom  
of the screen, and they usually cover only a small  
portion of the picture.  
To become familiar with the various menus provided by  
the TV, you can view the in built demonstration.  
Each of the menu options is displayed in turn.  
When you wish to stop the demonstration, press any  
button on the remote control.  
-
In “Text” mode, information unrelated to the program,  
such as news or weather, is displayed.  
On Timer Volume  
The preferred volume can be set for when the timer  
automatically turns on the TV.  
Text often covers a large portion of the screen.  
Channels / Field  
Auto Power Off  
Depending on the particular broadcast, it might be  
necessary to make changes to “Channels” and “Field”.  
Different channels and fields display different information:  
Field 2 carries additional information that supplements  
the information in Field 1. (For example, Channel 1 may  
have subtitles in English, while Channel 2 has subtitles in  
Spanish.)  
When you set the timer “On”, the TV will eventually turn  
off, if no controls are operated for 3 hours after the TV was  
turned on by timer. This function is only available in timer  
“On” mode and prevents overheating or leakages, which  
may occur if a TV is on for too long.  
Misspellings and unusual characters sometimes occur  
during closed caption transmissions, especially those of  
live events. There may be a small delay before captions  
appear when you change channels. These are not  
malfunctions of the TV.  
English - 5  
 
R.Surf Feature  
Picture -  
Picture - PIP (depending on the model)  
Mode / Custom / Color Tone / Size /  
Digital NR / DNIe Jr / Tilt  
This feature allows you to set  
the TV to return to a particular  
channel after a certain amount  
of time. For example, you may  
be watching a channel when  
commercials start. You can set  
the R.Surf to “5 minutes”, then  
switch channels. After minutes,  
the TV will return to the original  
channel.  
You can display a sub picture within the main picture of TV  
program or external A/V devices such as VCR or DVD.  
In this way you can watch TV program or monitor the video  
input from any connected devices while watching TV or other  
video input.  
Mode:  
Dynamic/Standard  
Movie/Custom  
Picture  
Mode  
: Dynamic  
Surf  
00: 29  
Custom  
Color Tone  
Size  
PIP  
PIP: On/Off (1)  
You can activate or  
deactivate the PIP function.  
: Normal  
: Normal  
You can select the type  
of picture which best  
corresponds to your viewing  
requirements.  
PIP  
: On  
: TV  
Source  
Swap  
More  
Move  
Enter  
Return  
If the PIP is activated  
Position  
Channel  
:
Press the R.SURF button repeatedly to set the timer  
in thirty second intervals, up to five minutes.  
(On) when the picture  
size is set to “Zoom”  
mode, the picture  
: 3  
Press the P.MODE  
button on the remote control to select one of the  
standard picture settings.  
Move  
Enter  
Return  
size is automatically converted into “Normal” mode.  
However, you can select “Zoom” after activating the  
PIP.  
Custom  
Contrast  
Brightness  
Sharpness  
Color  
: 100  
Custom:  
: 45  
: 65  
: 43  
Contrast/Brightness/  
Sharpness/Color/Tint  
The TV has several settings  
which allow you to control  
the picture quality.  
You can hear only the sound of the main picture while  
the PIP is activated.  
Tint  
: G 50 R 50  
The PIP function is not available in “Component”  
mode.  
Move  
Enter  
Return  
Color Tone: Cool2/Cool1/Normal/Warm1/Warm2  
You can change the color of the entire screen according to  
your preference.  
Source  
You can select a source of the sub-picture.  
Swap (3)  
Size: Normal/Zoom  
You can select the picture size which best corresponds to  
your viewing requirements.  
You can interchange the main picture and the subpicture.  
Position:  
/
/
/
Press the P.SIZE button on the remote control to  
change the picture size.  
You can select a position of the sub-picture.  
Channel (2)  
Digital NR  
You can select a channel of the sub-picture only when the  
“Source” is set to “TV”.  
If the signal received by the TV is weak, you can activate  
this feature to reduce any static and ghosting that may  
appear on the screen.  
DNIe Jr (Digital Natural Image engine Junior)  
(depending on the model)  
Easy functions of the  
remote control  
This feature bring you more detailed image with detail  
enhancement, contrast enhancement and white  
enhancement. New image compensation algorithm gives  
brighter, clearer, much detailed image to you.  
DNIe Jr technology will fit every signals into your eyes.  
Tilt (depending on the model)  
If you find that the picture received is slightly tilted to one  
side, you can adjust the tilt setting.  
English - 6  
 
Sound -  
Troubleshooting  
Mode / Custom / MTS / Auto Volume /  
Turbo Sound / Pseudo Stereo  
If the TV seems to have a problem, first try this list of possible  
problems and solutions. If none of these troubleshooting tips  
apply, then call your nearest Samsung authorized service  
center.  
The TV won’t turn on.  
Make sure the wall outlet is working.  
Make sure the TV is plugged in.  
Make sure the remote has batteries.  
Mode: Standard/Music/  
Movie/Speech/Custom  
You can select the type of  
special sound effect to be  
used when watching a given  
broadcast.  
Sound  
Mode  
: Custom  
Poor picture.  
Remote control malfunctions  
Custom  
MTS  
: Stereo  
: Off  
Try another channel.  
Adjust the antenna.  
Check all wire connections.  
Replace the remote control batteries.  
Clean the upper edge of the remote control (transmission  
window).  
Auto Volume  
More  
Move  
Enter  
Return  
Check that the “+” and “-” ends of the batteries are  
inserted correctly.  
Check that the batteries are drained.  
Press the S.MODE  
Poor sound quality.  
button on the remote  
Try another channel.  
Adjust the antenna.  
control to select one of the standard sound settings.  
No picture or sound.  
Custom: Bass/Treble/Balance  
The TV has several settings which allow you to control the  
sound quality.  
Try another channel.  
Press the SOURCE button.  
Make sure the TV is plugged in.  
Check the antenna connections.  
Make sure the MUTE button is off.  
If you make any changes to these settings, the sound  
mode is automatically switched to “Custom”.  
No color, wrong colors or tints.  
MTS (Multi-channel Television Sound)  
Depending on the particular program being broadcast, you  
can listen to Mono, Stereo, or SAP.  
Make sure the program is broadcast in color.  
Adjust the picture settings.  
Press the MTS button on the remote control  
repeatedly to select “Stereo”, “Mono”, or “SAP”  
(Secondary Audio Program).  
Picture rolls vertically.  
Adjust the antenna.  
Check all wire connections.  
If you are using a VCR, check the tracking.  
Auto Volume  
Each broadcasting station has its own signal conditions,  
and so it is not easy to adjust the volume every time the  
channel is changed. This feature lets you automatically  
adjust the volume of the desired channel by lowering the  
sound output when the modulation signal is high or by  
raising the sound output when the modulation signal is  
low.  
The TV operates erratically.  
Unplug the TV for 30 seconds, then try operating it again.  
Your remote control does not operate your TV.  
Make sure the remote has batteries.  
Check that the “+” and “-” ends of the batteries are  
inserted correctly.  
Check that the batteries are drained.  
Turbo Sound  
This feature emphasizes the bass and treble frequencies  
to add fullness to the sound.  
Press the TURBO button on the remote control  
repeatedly to select “Off”, “Plus” or “Voice”.  
continued...  
Pseudo Stereo  
This feature converts a monaural sound signal into two  
identical left and right channels. Once the “Pseudo Stereo”  
is set to “On” or “Off”, the setting applies to the sound  
effects such as “Standard”, “Music”, “Movie” and “Speech”.  
English - 7  
 
OSD Map  
: It is variable depending on the model.  
Important Warranty Information  
Regarding Television Format Viewing  
Input  
– Source List  
– Edit Name  
– TV / AV1 / AV2 / S-Video / Component  
– VCR / DVD / Cable STB / Sat. STB / AV Recv. / DVD Recv. / Game /  
Camcorder / DVD Combo  
Standard screen format televisions (4:3, the aspect ratio of the  
screen width to height) are primarily designed to view standard  
format full-motion video. The images displayed on them should  
primarily be in the standard 4:3 ratio format and constantly  
moving. Displaying stationary graphics and images on screen,  
such as the dark top and bottom letterbox bars (wide screen  
pictures), should be limited to no more than 15% of the total  
television viewing per week.  
Picture  
– Mode  
– Dynamic / Standard / Movie / Custom  
– Contrast / Brightness / Sharpness / Color / Tint  
– Cool2 / Cool1 / Normal / Warm1 / Warm2  
– Normal / Zoom  
– Custom  
– Color Tone  
– Size  
– Digital NR  
– DNIe Jr ✽  
– Tilt ✽  
– Off / On  
– Off / On  
Wide screen format televisions (16:9, the aspect ratio of  
the screen width to height) are primarily designed to view  
wide screen format full-motion video. The images displayed  
on them should primarily be in the wide screen 16:9 ratio  
format, or expanded to fill the screen if your model offers this  
feature, and constantly moving. Displaying stationary graphics  
and images on screen, such as the dark side-bars on non-  
expanded standard format television video and programming,  
should be limited to no more than 15% of the total television  
viewing per week.  
– PIP ✽  
– PIP  
– Off / On  
– Source ✽  
– Swap  
– Position  
– Channel  
Sound  
– Mode  
– Custom  
– MTS  
– Auto Volume  
– Turbo Sound  
– Pseudo Stereo  
– Standard / Music / Movie / Speech / Custom  
– Bass / Treble / Balance  
– Mono / Stereo / SAP  
– Off / On  
Additionally, viewing other stationary images and text such as  
stock market reports, video game displays, station logos, web  
sites or computer graphics and patterns, should be limited as  
described above for all televisions. Displaying any stationary  
images that exceed the above guidelines can cause  
uneven aging of picture tubes (CRTs) that leave subtle,  
but permanent burned-in ghost images in the television  
picture. To avoid this, vary the programming and images,  
and primarily display full screen moving images, not  
stationary patterns or dark bars. On television models that  
offer picture sizing features, use these controls to view the  
different formats as a full screen picture.  
– Off / Plus / Voice  
– Off / On  
Channel  
Setup  
– Auto Program  
– Add/Delete  
– Air/CATV  
– Name  
– Deleted / Added  
– Air / STD / HRC / IRC  
– LNA ✽  
– Off / On  
– Time  
– Clock  
Be careful in the selection and duration of television formats  
used for viewing. Uneven CRT aging as a result of format  
selection and use, as well as other burned-in images, is not  
covered by your Samsung limited warranty.  
– Sleep Timer  
– On Timer  
– Off Timer  
– On Timer Volume  
– Plug & Play  
– Caption  
– Caption  
– Mode  
– Channels  
– Field  
– Off / On  
– Caption / Text  
– 1 / 2  
– 1 / 2  
– Language  
– Blue Screen  
– Melody  
– English / Español / Português  
– Off / On  
– Off / On  
– Demonstration  
English - 8  
 

Quadra Fire Stove MTVERNON AE CSB User Guide
Radica Games Video Game Console 76037 User Guide
Radio Shack Battery Charger 08A01 User Guide
Radio Shack TV Antenna VU 210XR User Guide
Radio Shack Watch 63 5048 User Guide
RCA Satellite TV System F27TF720 User Guide
Ricoh Printer MIB II User Guide
Runco Projector DTV 873 User Guide
Samsung Projector SP D400S User Guide
Sanitaire Vacuum Cleaner SC678A User Guide