Sagem Cell Phone MY X6 2 User Guide

S
 
Your phone package - Accessories  
When you open the box, check that all items are present:  
1 - Phone  
2 - Charger  
3 - Battery  
4 - User guide  
5 - Wellphone CD  
1
4
2
5
3
Accessories  
We advise you the use of SAGEM brand accessories for an optimal operating of your phone and of your accessories.  
You can order the following accessories:  
-
-
-
-
-
-
-
Stereo pedestrian kit  
Bluetooth pedestrian kit  
Additional battery  
Additional charger  
USB cable (with associated drivers) and serial cable to connect your phone to a PC (*)  
Cigar lighter charger  
Necklace  
(*) Warning: the USB cable equipped with a charge connector is an extra connector. If the battery has run down, we  
advise you the use of the charger provided with the phone.  
Your phone package - Accessories  
3
 
   
Description  
Zoom (in photo or video  
preview screen)  
Volume setting (in call)  
Red key: Hold down: Switch on/off. In a call context: Reject a call - hang up  
In menus: Return to idle screen  
Green key: Long press: Activate/Deactivate hands-free mode  
In call context: Call - receiving a call  
Right programmable key: (Function available depending on model)  
In idle screen: Access to certain functions (shortcuts)  
In menus: Access to the selection shown on screen in the tab (*)  
Left programmable key: (Function available depending on model)  
In idle screen: Access to certain functions (shortcuts)  
In menus: Access to the selection shown on screen in the tab (*)  
The navigator allows you:  
-
to navigate in the various functions pressing the relevant part (up, down,  
right, left)  
-
to confirm your selection pressing the central part (OK  
)
In idle screen, pressing the navigator displays the main menus icons  
Pressing the navigator followed by one of the twelve keys of the keypad, you  
can display a menu directly.  
When composing a message: Short press: switches from one input mode  
*
#
to another (T9, ABC, 123). Long press: upper case/lower case  
Hold down: In idle screen: Silent mode. In call reception mode: Short press  
stops ring tone. In ring tone setting mode: Activate / deactivate ring tone  
Stops sound in video or message playing, or in a game  
Photo taking key  
IrDA  
(infrared)  
A long press on the keys  
2
to  
9
directly displays the phonebook  
2 to 9  
(*) In this manual, when a function is chosen by pressing on this key,  
square brackets are used (e.g.: [Save]).  
4
Description  
 
   
Installing the SIM card and the battery  
WARNING  
Depending on the model, network configuration and associated subscription cards, certain functions may not be available.  
Ensure that your SIM card is a 3 V SIM type that is compatible with your phone. Inserting an incompatible card will be indicated  
by a message when your phone is switched on. Contact your operator.  
Your phone is identified by its IMEI number. Write this number down, and do not keep it with your phone, because you may  
be asked for it in the event of your phone being stolen, in order to prevent it from being used, even with a different SIM card.  
In order to display the IMEI on your phone's screen, type: *#06#.  
The SIM card is inserted under the phone's battery. Ensure that the phone is  
switched off and the charger disconnected.  
1
1
2
3
Turn the phone back and slide the lock button up to remove the back cover.  
Take out battery if already installed.  
Slide the SIM card, with cut corner as shown on the phone, into the card  
holder with fold face down.  
4
5
Place the battery by positioning first the top of it, as shown on the battery.  
Replace the back cover, locking it first on the top part.  
3
Necklace attachment  
2
You can insert a necklace or wrist strap into into the notch located in the right  
bottom of the inside part of the phone.  
4
5
Description  
5
 
     
Inserting the memory card  
1
2
3
4
5
Turn the phone back and slide the lock button up to remove the back cover.  
Remove first the back cover then the front cover, pushing on the two side clips.  
Insert the memory card pushing it until you hear a «clic».  
Turn the front cover back, replace the keyboard then put the electronic board inside. Replace the back cover.  
To remove the memory card, gently press it to make it come out.  
Memory card slot  
3
2
1
Charger and  
accessories  
connector  
5
4
Using the memory card  
The memory card is very fragile. Take care when you insert or remove the memory card.  
Some memory cards must be formatted with a PC before first use with the phone.  
6
Description  
 
Idle screen  
The idle screen may contain the following information:  
1 - The title bar icons:  
Battery (if it flashes red, the battery must be charged immediately)  
Silent mode (the ringtone is off)  
Only emergency call is possible  
Signal strength level (between 0 and 5 bars)  
Message received (read your message), flashing: memory full (delete some messages)  
Grey: GPRS unavailable  
Black: GPRS connection  
Flashing: GPRS connection on hand  
WAP connection  
2 - Date and time, in digital or analog mode  
3 - Network provider  
4 - Thumbnail centred on bottom line:  
The main « Menu » thumbnail shows that the menus can be accessed by pressing the navigator. The following information  
may also be displayed: « 1 message received » or « 1 call » (incoming call failed).  
It can be deleted by pressing  
briefly.  
Idle screen  
7
 
   
Quick start  
Information on the SIM card  
To use your phone, you need a card called SIM card. It contains personal  
information that you can modify:  
Secret codes (PIN(s): Personal Identification Numbers), these codes allow you  
to protect access to your SIM card and phone  
Phonebook  
Messages  
How special services work.  
Your phone is compatible with the SIM 3V cards.  
WARNING  
This card must be handled and stored with care in order not to be damaged. If you should lose your SIM card, contact  
your network provider immediately.  
Please keep your SIM card out of reach of young children.  
Getting started  
When you switch on your phone for the first time, follow instructions displayed on the screen.  
If access to the SIM card is protected, the device prompts you to enter the PIN number:  
Enter the code between 4 and 8 digits given to you when the SIM card was issued. These digits do not appear on the screen  
for security reasons.  
After pressing [OK], the phone activates the SIM card settings and switches on again ; enter your PIN code again then the  
date and time, make your choice for the following settings: time zone, daylight savings, skin, wallpaper, screensaver, ring  
tone, volume, vibrate and voicemail number.  
If there are contacts saved in your SIM card, you are invited, if you wish, to copy them in the phone contacts memory.  
8
Quick start  
 
       
Warning  
If a wrong PIN number is entered three times in succession, your SIM card is blocked. You must then:  
- Enter « **05* ».  
- Enter the PUK (Personal Unblocking Key) code provided by your operator, and validate.  
- Enter your PIN number and validate.  
- Enter your PIN number again and validate.  
After 5 or 10 failed attempts (depending on the type of SIM card), the SIM card is definitely locked. You must then  
contact your operator to obtain a new card.  
Switching ON/OFF  
When your phone is off, a short press on  
will turn it ON.  
When the phone is ON, if your are browsing inside the menus, a short press on  
will come back to the idle screen. When  
you are in the idle screen, a long press on  
will switch OFF the phone.  
Network  
From now on the phone hunts for a network on which it can make calls. If it finds one, it displays the name of the network on  
the screen. You are then ready to send or receive a call.  
If the network’s name appears, calls are possible on your operator's network.  
If the letter R and a network name are displayed, calls are possible on a roaming network provider.  
If the letter E is displayed without any network name, only the emergency services are accessible (ambulance, police,  
fire brigade).  
If the network icon flashes, the phone is in permanent search mode. There is no network available. The signal strength  
indicator received allows you to display the quality of reception. If it indicates less than three bars, search for better  
reception in order to call in good conditions.  
Quick start  
9
 
 
First call  
Dial the number you want to ring.  
Press  
.
During the call, the call in progress icon flashes on screen and tones may indicate the establishment of the call.  
While a call is connecting, the phone icon is flashing.  
You can adjust the sound level (volume) using the navigator upwards or downwards.  
At the end of the conversation press  
to hang up.  
International call  
Press 0 (hold down) to display « + », then dial the country code without waiting for the dial tone, then the number of the  
called party.  
Emergency services  
Depending on the network you can obtain the emergency service with or without SIM card or when the keypad is  
locked. It is enough to be in an area served by a network.  
To obtain the international emergency service, dial 112 then press  
.
Receiving a call  
When you receive a call, the number of your caller is displayed when it is presented by the network.  
Press to answer, and speak.  
To refuse the call, press  
.
To stop the ring tone or the vibrate, without refusing the call, press  
#.  
Hands-free mode  
During a call, press and hold  
to switch into hands-free mode.  
WARNING: in this mode do not bring the phone up to your ear.  
All the numbers corresponding to incoming and outgoing calls are logged in the list of recent calls.  
When on a call, pressing [Options] allows you to have access to different functions: switching to hands-free mode, switching  
to mute mode, displaying menus, displaying the phonebook.  
Pressing [Mute] allows you to switch off the microphone temporarily when you want that your correspondent does not listen.  
10  
Quick start  
 
   
Using your phone  
Improving antenna performance  
The antenna is integrated in your phone, under the back cover at the top.  
Avoid putting your fingers on this area when the phone is switched ON.  
If your fingers obstruct the antenna, the phone may have to operate with a higher  
power level than usual; decreasing its efficiency quickly. It could also affect the  
quality of your communications.  
Non ionising radiation  
To obtain maximum satisfaction from your phone, use it in a vertical position.  
Your personal safety can only be improved by doing so.  
Increase the battery life of your phone  
-
-
-
Don't press the keys when not necessary: each keypress activates the backlight, and uses much power.  
Don't obstruct the antenna with your fingers.  
Activation of IrDA or Bluetooth functions reduces the phone battery life. We advise you to deactivate them when not in use.  
Using your phone  
11  
 
Charging the battery  
Your phone is powered by a rechargeable battery. A new battery must be  
charged for 4 hours at least before being used for the first time. It reaches its  
optimum capacity after a few cycles of use.  
When your battery has been discharged, the empty battery icon flashes. In this  
case recharge your battery for at least 15 minutes before making any calls in  
order not to be cut off quickly.  
To recharge the battery:  
Connect the charger to a socket.  
Plug the end of the cable into the bottom connector of the phone.  
The phone is then charging up. The battery icon scrolls up and down to indicate  
that it is charging. When the battery is fully charged, the charging stops on its  
own. Disconnect the cable.  
When charging, the battery may warm up, this is normal.  
WARNING  
There is danger of explosion if the battery is placed in an incorrectly way or if it is exposed to fire.  
Do not short circuit it.  
The battery does not have any part that you can change.  
Do not try to open the battery casing.  
Use only the appropriate chargers and batteries as shown in the phone manufacturer's catalogue.  
The use of other types of chargers or batteries may be dangerous or invalidate the warranty.  
Used batteries must be disposed of in the appropriate places.  
We advise you to take the battery out if you plan not to use the phone for extended periods.  
You are strongly advised not to connect your phone to the charger if it doesn’t contain a battery.  
The charger is a safety step-down transformer, it is forbidden to modify, alter or replace it by another component (power  
supply plug, etc).  
12  
Using your phone  
 
 
Phonebook  
Using the phonebook  
Enter the Phonebook menu, the contacts list is displayed if you already get some (otherwise, go to Storing a new contact).  
When a contact is selected, an icon is displayed in the title bar:  
contact stored in the SIM card  
contact stored in the phone  
contact stored in the Fixed Dialling. See PIN2 number and Fixed dialling in Security Menu for more details about this  
activation.  
You can search for a contact quiclky by typing the first letters (up to three). You can display it by pressing OK.  
Storing a new contact  
-
-
-
Display the Phonebook, press [Options] then select Add SIM contact or Add phone contact  
.
Enter the last name and press the navigator.  
Enter the number and press the navigator (OK).  
Note: you can fill other fields if you store the contact in the phone memory (email, address, ringtone, photo, etc.).  
-
Press [Save] to store it.  
Calling a contact  
Several ways:  
-
-
-
Select a contact. Press  
to start the call.  
Select a contact, press OK, his number is displayed, press [Call] to start the call.  
Direct call from the idle screen (only for the contacts stored in the SIM card memory): type the number with which the  
contact was saved then  
*
(example : 21 *) or the number then #, the number is displayed, confirm.  
Phonebook  
13  
 
           
Contact options  
To display the various options, select a contact and press [Options].  
Modifying a contact  
Modify what you want and validate then select Save once the modifications completed.  
Sending a message  
To send a SMS or a MMS to a contact (see chapter Messages).  
Sending by  
To send a contact details by SMS, MMS, IrDA or Bluetooth (see chapters Messages and Connectivity).  
Copy to SIM / Copy to phone  
This allows you to copy your phonebook contacts from one memory to the other. Only the name and the first phone number  
will be copied.  
Memory  
Select SIM or Phone and validate.  
Phone: the screen displays the amount of memory used. The memory capacity is shared between the phonebook and various  
other features. If you lack memory, check if you can free some space.  
SIM: available memory only for contacts.  
Delete/Delete all  
This allows you to delet the contact selected or all the contacts.  
Set as my card/Business card  
The details of a contact stored in the phone memory can be saved in a business card.  
- Select a contact and press [Options].  
- Select Set as my card and [OK]. The details are saved as Business card. Then you can read it, modify it or send it by  
SMS, MMS or IrDA.  
14  
Phonebook  
 
       
My numbers  
You can create the entries corresponding to your own numbers in order to consult them when necessary.  
Select My numbers and validate. Enter the different details and validate.  
Synchronise  
You can synchronize your phonebook with your archives stored in your operator’s network depending on the options offered  
by your operator.  
The local synchronisation with your computer is only computer originated, from Wellphone software; you have only to activate  
infrared, Bluetooth, or configure your USB connection in your phone.  
Contacts synchronisation with a computer  
Install Wellphone, software provided on CD, and click on DIRECTSYNC: you can synchronise your contacts stored in the  
phone memory with those of your Lotus Notes™ or Microsoft Outlook™ bases  
.
Mailing lists  
A mailing list allows you to group contacts: this list can be used to send messages easily to all the list contacts.  
-
-
-
-
-
-
In the phonebook, select the Mailing Lists tab pressing the navigator rightwards.  
Press [Options].  
Select Add mailing list  
.
Select the list type (SMS or MMS).  
Enter a name and press the navigator.  
Then, on a list press [Options]. Select Add contact each time you want to add a contact in the list.  
Phonebook  
15  
 
 
Messages  
From this menu, you are able to send SMS and MMS. MMS is a Multimedia Message Service, which allows you to enclose  
photos, audio files, and others rich contents to your messages; these messages can even be composed of several slides.  
MMS are differently charged to SMS are. Please contact your network provider to get more information on their cost and the  
service availability.  
Compose SMS  
Messages/Compose  
The language used is the one selected on the display of the phone (if the language selected is not compatible with the Easy  
Message T9™, the English language will be automatically selected).  
The Easy Message T9™ mode helps you to easily write your messages.  
Using T9 Mode  
Press once the key corresponding to the letter chosen and compose the word by continuing to press the keys corresponding  
to the various letters without paying attention to the display: the word is highlighted.  
The same sequence of keys pressed can correspond to several words, existing on the dictionary. If the word that appears is  
not the word you expected, press the navigator upwards to scroll through the words corresponding to this key sequence.  
Once you agree on the word proposed on the screen, press the navigator rightwards to validate it or on the  
validates and inserts a space after the word), and go on writing the next word.  
0
key (which  
If the word you are expected is not proposed, please add characters until you get the message Add a word? Press Yes and  
validate if the word displayed suits you or modify this word before adding it in the dictionary.  
If you do not want to use T9 mode, you can change of input mode (which appear at the top right of the title bar) pressing  
:  
the 123 mode allows you to type numbers and the ABC mode allows you to type letters: press on one key several times to  
make the letter wanted appear (for example: press twice the  
2
key to display B).  
Upper case  
A long press on  
will display the next letter in upper case ( icon).  
Punctuation characters  
Punctuation characters are obtained by pressing the  
1
key (except in 123 mode), or with the help of Insert mode (fast access  
by briefly pressing  
#).  
16  
Messages  
 
         
Accented characters  
Accented characters are generated automatically in T9 mode.  
In ABC mode accented characters are available by pressing the key supporting the non-accented character repeatedly.  
Saving the message  
-
-
Select Save if you do not want send the message immediately or if you want to send it several times.  
Select where you want to save it (SIM card or phone). It is saved in the Drafts menu.  
Sending the message  
-
-
Once the text entered, press the navigator or press [Options] and select Add recipient  
.
Enter the receiver’s number or take it in your phonebook pressing [Options] then selecting [Contacts].  
You alson can select a contacts list in your phonebook.  
-
Select Send  
.
Note: if the message type (SMS or MMS) has not been selected when composing the message, the phone prompts for a  
cofirmation.  
You can use an email address if the message is a MMS.  
Receiving messages  
When you receive a message, the phone plays the ring tone that you selected, and a message icon comes on the screen of  
your phone.  
If you do not read the messages, this icon remains displayed on the screen. When it flashes, the memory is full.  
Receiving icons, backgrounds or tunes can take several seconds. An icon is flashing when the download of your message is  
in progress.  
Note that you have two different possibilities for receiving MMS: automatically or manually; if « manual mode » is activated,  
then you will receive only a notification in your Inbox, meaning that a MMS is available on the MMS Server; select Retrieve  
in the options when you want to retrieve the MMS from the network.  
For more details about automatic and retrieval modes, see « Messages/Options » on page 19.  
Please contact your network provider to get more information on icons, backgrounds or tunes downloading.  
Received messages are stored in the SIM card or in the phone until you choose to delete them.  
Messages  
17  
 
 
Messages menu  
Messages/Inbox  
Messages are listed in chronological order, the latest one being displayed first.  
The quantity of Not Read and Not Retrieved messages is shown. Not Retrieved and Not Read messages are shown in bold.  
Messages/Outbox  
This menu displays the messages that have not been sent. You can therefore send them again.  
Messages/Sentbox  
The Sentbox menu is used to store all your sent messages if you activated the option Store sent messages in the Options  
menu (see page 19).  
Too many messages saved will quickly fill up the available memory and no further messages will be received.  
For each message, its characteristics (shown with an icon) and the time (or date) of sending are displayed on the screen.  
Select a message and press the navigator.  
Choose one of the options given: Read, Modify, Forward, Delete, Delete all.  
Messages/Drafts  
When you store a composed message, it is stored among the drafts.  
Select a message and press [Options]. The options are: Delete, Read, Modify, Details.  
If you select a message and press the navigator, you can modify it.  
If you want to send it, select Modify then press [Options] and select Send  
.
Messages/Templates  
When composing a message, if you selected the Save as template option, the template is saved in this menu.  
The same options as for the drafts are available for the templates.  
18  
Messages  
 
         
Messages/Options  
Choose one of the options given: SMS or MMS.  
The SMS sending options are: message centre number, store sent message, acknowledgment, reply given, period of validity  
(during that period, the network provider will try to send the message), message format.  
The MMS options are:  
-
-
Store sent messages: (it is highly recommended that you keep this function deactivated, in order to avoid a full memory),  
Retrieval mode: if you are in a poor coverage area, it may be more convenient to choose the manual retrieval mode which  
gives you the retrieve later option.  
-
-
-
Priority: selection of a priority to send a message.  
Request delivery report: request of a delivery report when sending a message.  
Period af validity: during that period, the network provider will try to send the message.  
Advanced settings  
-
-
-
-
-
-
Send delivery report: sending a delivery report when receiving a message.  
MMS ignore: if you want to deactivate the reception of any MMS in your phone.  
MMS server: to select another MMS provider, or set the parameters of a new MMS provider.  
Sender visibility: you choose to display or not your phone number on the receiver’s phone screen, with that message.  
Maximum size: if you want to activate/deactivate the option of maximum size supported for the MMS.  
Display Bcc: if you want to activate/deactivate this display.  
Messages/Memory  
You may know the memory available for saving messages.  
Choose one of the options given: SMS or MMS.  
The SMS screen displays the memory available either on the SIM card or on the phone.  
The MMS screen displays how much memory is used in Kbytes.  
Messages/Local info.  
This menu is used to activate reception of information broadcast by the network.  
You can choose whether you want to receive this information or not (please contact your network provider).  
Messages  
19  
 
     
Photo  
This menu allows you to take photos and use them for different purposes. For instance, you can send them to another phone  
or an Internet address, store them, use them as wallpapers or screen savers.  
Taking and saving a photo  
Taking a photo  
-
Select the Camera menu or press the side key from the idle screen. The camera is now on. Look into your phone display  
and position your subject. Move your phone to position your photo.  
Press the navigator or on the side key, the photo is taken and stays on the phone display.  
-
Warning: if you press [Back], you will go back to the previous screen and lose the photo you have just taken.  
-
-
Press the navigator if you want to send the photo immediately by MMS.  
Press [Save] to save your photo, a progress bar animates then different options are displayed:  
Send via: allows you to send the photo by MMS, IrDA or Bluetooth.  
Take photo: allows you to take a new photo.  
Add to contact: allows you to assign a photo to a contact saved in the phonebook.  
Rename: allows you to modify the name of a photo.  
Use as: allows you to select the photo as a wallpaper or screensaver.  
Editor: various options to modify a photo.  
Zoom: allows you to magnify certain parts of your photo,  
Adjustment: allows you to improve contrast,  
Emboss: allows you to modify a photo with an embossed grey tint,  
Negative: allows you to change a photo into negative,  
Grey Scale: allows you to change color into black and white,  
Add mark: allows you to add special characters or drawings to your photo,  
Add frame: allows you to surround your photo with a frame,  
Contrast: allows you to increase or decrease the contrast of your photo,  
Sharpen: allows you to sharpen a photo,  
Blur: allows you to add blur to a photo,  
Sepia: allows you to change colors into sepia,  
Shape: allows you to shape a photo,  
Brigthness: allows you to increase or decrease the brightness of a photo,  
Solarize: allows you to increase or decrease the solarize of a photo,  
Saturation: allows you to increase or decrease the color saturation.  
20  
Photo  
 
           
If there is not enough memory to save the photo, a warning message appears, prompting you to confirm whether you want  
to go on.  
Once taken, the photo has a number and is saved in Multimedia/Pictures.  
Note: using the camera during a call may disturb the call quality.  
Settings before taking a photo  
Zoom  
:
To activate zoom, use the navigator upwards or downwards or the side keys (  
+
and -).  
Note: if the zoom selected does not match with the storing format, the photo is automatically saved in an appropriate format  
Other settings (pressing [Options]):  
Activate timer: to take a photo with a 5, 10 or 15 second time delay.  
Effects: to select an effect (sepia, negative or grey levels).  
Exposure: to select luminosity (indoor, sunny, etc.).  
Timer duration: to select the timer delay  
Click sound: to select the sound you will hear when taking a photo.  
Photo quality: to select the photo quality.  
Photo format: to select the format in which your photo will be saved  
Go to video: to take a video (see chapter Video).  
Photo  
21  
 
Video  
Taking a video  
-
-
Select the Video menu.  
If necessary, select the following settings pressing [Options]:  
Video size restriction: allows you to choose a video size.  
Video sound: allows you to record wether not the sound when recording a video.  
Press the navigator to record then press [Stop] when you want to stop recording.  
The video is automatically saved and has a number. It is saved in Multimedia Videos  
/
.
Note: the phone automatically stops recording when the maximum size available is reached.  
Press [Options] to display the options:  
New video: allows you to take a new video.  
Play: allows you to play the video.  
Send by: allows you to send a video by MMS, IrDA or Bluetooth.  
Rename: allows you to modify a video name.  
Delete: allows you to delete a video.  
Note: the videos are saved in the phone with a .3gp format.  
22  
Video  
 
         
Multimedia  
This menu contains photos and videos taken and saved with your phone, the sounds recorded and all the downloaded objects  
(pictures, ring tones, etc).  
It also contains ghosts which display the copyrights status of the multimedia objects downloaded in the phone or in the  
memory card.  
There are two tabs, that you can select pressing the navigator rightwards or leftwards:  
-
-
Mobile tab (phone memory)  
My microSDTM tab (available if you have inserted a memory card in your phone).  
With the navigator, enter the menu:  
Multimedia/Pictures.  
To display a picture, select it and press the navigator.  
To display others, press the navigator upwards or downwards.  
To display the different options, press [Options].  
-
-
-
-
New photo: allows you to take a new photo.  
Use as: allows you to use the picture as a wallpaper or screen saver.  
Send by: makes it possible to transmit a picture (NB: you may not send any copyrighted picture).  
Direct print: if your phone is connected to a printer (via infrared, Buletooth or USB cable) this option allows you to print  
the photo directly (without using a PC). If you use a USB cable, it must be «Pictbridge» configured (see chapter  
Connectivity).  
Multimedia/ Sounds  
To listen to a sound, select it and press the navigator.  
To listen to others, press the navigator upwards or downwards.  
Note: to listen to several sounds in continuation, it is better to use Music Player.  
Multimedia/Videos  
To display a video, select it and press OK. To display the video in full screen, press the navigator rightwards.  
To display others, press the navigator upwards or downwards.  
Exchanging objects with a PC and your phone  
You must connect them with a USB cable, by infrared or Bluetooth (see chapter Connectivity).  
Multimedia  
23  
 
           
Connectivity  
You can exchange with other devices (PC, mobile phones, personal assistants, printers, etc.) various data: pictures, sounds,  
photos, videos, To Do tasks, organiser events, contacts, etc.  
Data exchange can be done through:  
-
-
-
a serial or USB cable,  
an infrared connection,  
a bluetooth connection.  
If you have inserted a memory card in your phone, it is considered as an additional memory in the Windows explorer files  
directory; you can copy/paste.  
If you want to exchange objects between the phone memory and a PC, you must install the Wellphone software provided on  
CD: select Multimedia to open, from the PC, the phone files explorer.  
To save contacts, events or tasks, the Wellphone software provided on the CD with your phone (also available from  
You can read more details about Phonebook or Calendar in chapters Phonebook and Organizer  
.
Note: If a call comes in during an exchange of data with your PC, the link will be interrupted and will have to be manually  
re-started.  
Connectivity/Bluetooth  
This menu allows you to set your phone Bluetooth connection in order to communicate with other devices equipped with  
Bluetooth: for example, an audio connection with a pedestrian kit, a car kit or a data connection with a PC.  
Bluetooth is a free wireless connection, with a 10 metre maximum range.  
My Bluetooth name: allows you to assign a name to your phone for the Bluetooth connection. This name is displayed on the  
devices connected.  
Mode: allows you to activate the phone Bluetooth connection.  
-
-
-
Off: Bluetooth connection impossible.  
On and hidden: your phone is not detected by the other devices but the phone detects the other devices.  
On and visible: your phone can be detected by another device.  
Paired devices: allows you to search for devices which may connect with Bluetooth link with your phone (for instance:  
headset).  
Connectivity/IrDA  
This menu allows you to activate or deactivate the infrared connection.  
24  
Connectivity  
 
                           
Connectivity/Serial speed  
This menu enables you to select the speed to be used for data exchanges via your phone's serial port. Except for specific  
requirements, it is advisable to stick to the default setting: Automatic  
.
Connectivity/Car kit  
This menu allows you to configure the options of the phone with a pedestrian kit or a car kit (Automatic response, Switch off,  
Kit volume).  
Connectivity/USB mode  
This menu allows you to select a mode to connect the phone to a peripheral with the USB cable available as an accessory.  
Modem: to exchange data between the phone memory and a PC.  
Mass storage: to exchange data between the memory card inserted in the phone and a PC.  
Pictbridge: to connect the phone to a printer (printing photos) without using a PC.  
Connectivity/SyncML  
You can synchronize your phonebook, your organizer or your ToDos with your archives stored in your operator’s network  
depending on the options offered by your operator.  
The local synchronisation with your computer is only computer originated, from Wellphone software; you have only to activate  
infrared, Bluetooth, or configure your USB connection in your phone.  
Connectivity  
25  
 
   
Music Player  
This menu allows you to listen to musics in a contiuous way like a portable music player.  
If you do not have any music in memory, use WAP to download some or connect your phone to a PC (see chapter  
Multimedia).  
Two tabs are displayed: Player and Library  
.
Select Library pressing the navigator rightwards. The directory of the musics contained in the phone and in the memory card  
(if it is present) is displayed.  
Select [Options]: you can play all the musics directly or manage them in lists.  
Creating a playlist  
-
-
-
-
Select [Options] in the Library tab.  
Select Create playlist  
.
Type a name for your playlist and press OK  
.
The list of the musics is displayed in two tabs: those contained in the phone memory or pressing the navigator rightwards  
those contained in the memory card.  
-
Select the music you want in your playlist and press OK to add the music to the playlist ; do it again if you want add others  
or select Add all songs to add them all to the playlist.  
When pressing [Options] on a playlist, you can display or play the contents, add musics, create a new playlist, delete one  
or modify its name.  
Playing your music  
Player tab: This tab opens as soon as a music or a list of musics, has been selected to be played.  
To display the different options, press [Options]:  
-
-
-
-
-
-
-
-
Play: to play musics of the playlist.  
Remove from player: to remove the music selected from the playlist.  
Clear list: to remove all the musics from the playlist  
Play options: to play the musics one by one or in a continuous way.  
Save all as: to set a new playlist.  
Send by: to send the music by message, IrDA or Bluetooth.  
Rename: to rename the music.  
Priority to phone/music: to give priority to phone (in case of incoming call) or to playing music.  
Note: music is in pause in case of incoming call, it automatically resumes at the end of the call.  
Details: properties of the music selected.  
-
26  
Music Player  
 
 
WAP  
WAP (Wireless Application Protocol): a protocol that translates the Internet language into WML and HTML languages that  
can be read by a phone. The WAP function allows you to log onto certain Internet sites. You can log onto sites that allow you  
TM  
to download ringtones, icons, animated screensavers, Java applications, videos to your phone.  
The WAP Menu  
The WAP navigator is under licence:  
Go to URL: this menu allows you to input an Internet address directly.  
Bookmarks: allows to store bookmarks (addresses of Internet sites).  
A bookmark stored in the list can be modified, sent or deleted.  
You can receive bookmarks and add them to this list.  
History: backward and forward navigation of the pages displayed are kept in  
memory.  
WAP settings  
:
The WAP navigator and the softwares  
included are the exclusive property of  
Openwave. For this reason, it is  
forbidden to modify, translate,  
disassemble or even decompile all or  
part of these softwares.  
-
Profiles: allows you to select or modify your provider’s configuration settings  
or to configure others providers’settings.  
Menu: allows you to add a new profile or to display the available memory.  
Bookmarks (see above).  
-
-
Note: see chapter Idle screen for information on @ and GPRS icons.  
WAP  
27  
 
 
WAP Logging on  
The connection to a WAP service on the GPRS network is not cut if an incoming call is received. You can answer the call.  
If you are logging onto the GSM or GPRS network, the @ symbol flashes, the metering of the cost of the call starts as soon  
as it stops flashing.  
Downloading objects  
TM  
Some WAP sites allow you to download ringtones, icons, animated screensavers, games or JAVA  
applications. Once  
downloaded, they are stored in your phone's memory. You can then save them in your phone (same operation as used for  
downloading using messages).  
WAP Logging off  
To log off, press  
. The logoff happens automatically after a few seconds of inactivity if you forget to log off. This period  
is defined by the linger time setting.  
GPRS  
A flashing icon indicates that the phone is logging onto a GPRS network.  
A non-flashing icon indicates that the GPRS network is available; if the icon is dark, it indicates that the phone is logged onto  
the GPRS network.  
This icon is not displayed if the GPRS network is not available or if the SIM card inserted in your phone does not include the  
GPRS service. It may also disappear when accessing WAP services if the connection uses the GSM network instead of the  
GPRS network.  
28  
WAP  
 
         
Games  
Your phone contains one or several games, depending on model. You can  
download more. You are the owner of a SAGEM mobile phone which gives you  
the ability to download applications and games to be executed on your phone  
thanks to the built-in Java™ engine.  
However, receiving applications from everywhere implies some basic knowledge  
of the possible effects of such download.  
We advise you to dwonload certified games or applications from your operator  
By default, the connection URL of your operator or of PlanetSagem is configured  
in your phone.  
If no connection URL is configured, by selecting the More games menu, you  
display the WAP function to configure new profiles which allow you to download  
games or applications.  
When you select  
a
game or an application, the General  
configuration/Connection menu (displayed with [Options] key) allows you to  
configure a profile which only be used by the game or application to connect to  
the network (to exchange scores for example) but is not used to download new  
games or applications.  
Games  
29  
 
 
Applications  
Applications/Services  
This item may not be present on your phone’s menu, as its contents depends on your SIM.  
Applications/Alarm  
This menu allows you to set and activate the alarm.  
The alarm works even when the phone is switched off.  
Applications/Timer  
This menu is used to set and activate the timer.  
The alarm icon appears on the idle screen.  
Applications/ToDo  
This menu allows you to add ToDo’s, access category-based Todo management and delete all the ToDo’s.  
If there are not any ToDo, you directly access to the options below.  
If there is a ToDo, press [Options] to display the options.  
-
-
-
Add written/vocal ToDo: allows you to add ToDo of the text or voice type. Fill in the different items. Save the ToDo.  
Memory: allows you to view the memory used by the different functions of your ToDo.  
Categories: allows you to see the different ToDo categories, assign a specific ring tone to each individual ToDo, know the  
number of ToDo’s in each category and see them.  
-
-
Delete all: allows you to delete all the ToDo’s from your ToDo.  
Synchronise: allows you to synchronise a ToDo with a computer.  
ToDo actions menu  
This menu allows you to do all the actions possible on any ToDo.  
On the Applications menu, please select ToDo.  
To display a ToDo, select it in the list and press the navigator.  
To display the different options, press [Options].  
-
-
-
Delete: allows you to delete the ToDo.  
Modify ToDo: allows you to modify the ToDo properties.  
Send by: allows you to send the the ToDo by message, IrDA or Bluetooth (see chapter Connectivity).  
30  
Applications  
 
       
Applications/Calculator  
This menu allows you to use your phone as a calculator.  
Use the following keys to make calculations:  
Upwards: Add, downwards: Subtract, rightwards: Multiply, lefwards: Divide  
The following keys are used for:  
: Equals or convert  
#: Decimal point.  
: Delete  
*
If no calculations are being run, pressing [Convert] allows you to use the value in the converter directly.  
Applications/Converter  
This menu allows you to convert one currency to another.  
Enter a value and press the navigator upwards to convert from one currency to another, or downwards to convert back.  
Pressing [Options] allows you to use the following options:  
Rapid exchange  
If the Rapid exchange is activated, the converter will work in the idle screen by entering the desired numbers and pressing  
the navigator to convert.  
Exchange rate  
Enter the exchange rate corresponding to the chosen currency.  
Currency  
Enter the two types of currency to be converted.  
Go to calculator  
This option allows you to use immediately the value converted in the calculator  
.
Applications  
31  
 
     
Organizer  
This menu gives you access to your diary and get to a day, week, month or specific date. It lets you add events, access the  
global actions for all the events and manage them by event category.  
Organizer/Calendar  
This menu lets you add events, manage events by category, see the available memory and delete all the events.  
-
Categories: allows you to see the different event categories, assign a specific ring tone to each individual category, know  
the number of events in each category and see them.  
Add written event/Add vocal event: allows you to add events of the text or voice type. Fill in the different items. Save the  
event.  
-
-
-
-
-
Clean-up: allows you to schedule the deletion of events that took place more than one day, week or month ago.  
Memory: allows you to view the memory capacity used by the different functions of your diary.  
Delete all: allows you to delete all the events from your diary.  
Synchronise: you can synchronize your organizer with your archives stored in your operator’s network depending on the  
options offered by your operator.  
The local synchronisation with your computer is only computer originated, from Wellphone software; you have only to  
activate infrared, Bluetooth, or configure your USB connection in your phone.  
The other menus are:  
-
-
See date: allows you to access events at a specific date.  
See today: allows you to access the events for the current day and the actions possible on any event (see, modify, delete  
and send).  
-
-
See week: allows you to access events on a week-by-week basis.  
See month: allows you to access events on a month-by-month basis.  
32  
Organizer  
 
   
Settings  
Sounds  
Sounds/Ring tones  
This menu allows you to allocate a ring tone to different functions (call receiving, message receiving, alarm).  
Sounds/Vibrate  
This menu allows you to activate the vibrate mode for calls.  
Sounds/Silent mode  
This menu allows you to switch to Silent mode.  
Silent mode can also be accessed via the idle screen by holding down the  
#
key.  
When the phone is in silent mode, this relevant icon appears on the idle screen.  
In this mode, the ring tone will not function, except for the alarm clock.  
Note: if you have activated the silent mode, it does not remain after switching off your phone.  
Sounds/Beeps  
This menu allows you to activate a beep for the battery, the keypad or the network.  
Sounds/ Recorder  
These menu allows you to record you own melody.  
Pressing [Start] record your melody or your voice by means of the microphone then save it.  
Give it a name and validate. The new tone is saved in the list of ringtones and in Multimedia/Sounds  
.
If you select the recorder by means of a programmable key, the sound is saved in the Applications/ToDo menu.  
Display  
This menu allows you to customize your screen by choosing a different presentation.  
Display/Wallpaper  
This menu allows you to display the background picture you want on your phone.  
Note: you can select wallpapers through the phone default wallpapers, the pictures downloaded in Multimedia/Pictures and  
the pictures of your memory card.  
Settings  
33  
 
                 
-
-
-
No wallpaper: select None  
.
Several wallpapers in a random way: select Random  
.
A specific wallpaper: select Browse  
:
Press [Select] on the wallpaper name, the wallpaper is selected.  
or  
Press the navigator: the picture is displayed. Press [Select] to select it as your phone wallpaper or press the navigator  
upwards or downwards to display others.  
Display/Screensaver  
This menu allows you to display an animation when the phone is in standby mode.  
Note: you can select screensavers through the phone default screensaver, the pictures downloaded in Multimedia/Pictures  
and the pictures of your memory card.  
-
-
-
No screensaver: select Normal screen.  
Several wallpapers in a random way: select Slide show  
.
A specific screensaver: select Browse  
:
Press [Select] on the screensaver name, the screensaver is selected.  
or  
Press the navigator: the picture is displayed. Press [Select] to select it as your phone screensaver or press the  
navigator upwards or downwards to display others.  
Display/Operator logo  
This menu allows you to display your operator's logo on the idle screen.  
On the menu, please select the menu and [Select].  
Select Activate or Deactivate and press [OK].  
Display/ Energy saving  
Economic mode  
You can select one of the three eco modes:  
-
-
-
Unlocked keypad: the keypad is always activ, meaning that anytime you press any key, that turns on the blacklight;  
Partial: press  
Complete: the screen is off. Press OK, the red or green key to turn on the blacklight and see the time. Press  
afterwards OK to reactivate the phone. This mode gives the maximum efficiency of the battery life.  
OK to reactivate the phone. Press OK, the red or green key to turn on the blacklight and see the time;  
Backlight  
-
-
Screen only: only the screen is lit up.  
Full backlight: both the screen and the keypad are lit up.  
Note: in any case, after a certain time of inactivity, the backlight will be automatically turned off to save battery life.  
34  
Settings  
 
         
Camera settings  
This menu allows you to set the camera and video features of your phone.  
-
Timer: this menu enables you to take a photo with a 5, 10 or 15 second time delay. During preview of the photo, activate  
the delayed exposure by pressing [Timer]. (NB: if you want to take the photo immediately, then press OK).  
Click sound: This menu allows you to select the sound you will hear when taking a photo.  
Photo format: This menu allows you to choose the format in which your photo will be saved.  
Photo quality: This menu allows you to select the photo quality.  
-
-
-
-
-
Video size restriction: This menu allows you to choose a video size.  
Video sound: This menu allows you to select or not the sound when recording a video.  
Languages  
This menu allows you to choose your phone's display language.  
Select your language and validate.  
If you select Automatic, the language used will be the one relative to your SIM card.  
Phonebook  
This menu allows you to select the way to sort contacts in the phonebook (by name or first name) and the filter applied on the  
contacts list display (SIM contacts, phone memory or both).  
Calls  
The Calls menu allows you to manage all the calls functions (call forward, displaying numbers, call waiting, voicemail number,  
etc.).  
Call forward  
Depending on your subscription, this service allows you to forward incoming calls to a different number or to the voice mailbox.  
Choose the type of forwarding you want from the options available.  
View last calls  
This menu allows you to access the list of last numbers used.  
Fast access to the list of calls from the idle screen: press  
.
Settings  
35  
 
             
Counters  
This menu allows you to consult the duration of the up calls.  
It can also be used to check the volume of data exchanged in GPRS.  
Display number  
This menu allows you to modify the status of the display number function.  
Select one of the options given: Anonymous mode, My number, Callers’ number.  
Anonymous mode  
You have the ability to mask your number on the phone of the person you are calling.  
Preset: network default mode.  
No: you choose not to activate anonymous mode and then to display your number.  
Yes: you choose to active anonymous mode and then not to display your number.  
Call waiting  
(Operator-dependent service)  
During a call, you may be informed that a caller is trying to reach you: you hear a special tone. The caller's identity is displayed  
on the screen (name or number).  
You can activate, deactivate, or consult the status of the call waiting service in order to check if it is active or not.  
During a call, if a second caller tries to contact you, the screen displays the call warning.  
Auto redial  
This menu allows you to call back a caller you have not managed to reach.  
You can set the redial function to inactive, on request or systematic.  
If you choose On demand, your phone will offer to redial your caller automatically if his number is busy.  
36  
Settings  
 
         
Blacklist  
The blacklist is used to limit failures on automatic calls (calls generated by the automatic redial function or by applications:  
data, fax for example).  
When several automatic calls failed with a number (number busy or unknown), this number is put in the blacklist and no  
automatic call will be done with this number any more until you delete it from the blacklist.  
Note: this function does not apply to the calls performed manually.  
Voicemail  
This function is used to record your voicemail access number.  
This number will be used during a call to the voice mailbox using the programmable keys.  
Enter your answer phone number and validate.  
ALS  
The ALS (Alternate Line Service) function allows you, depending on your subscription, to have two phone lines. The number  
of the line selected (1 or 2) for the calls appears on the idle screen.  
Security  
This menu allows you to configure your phone's security settings.  
PIN number  
This menu allows you to activate and modify your phone's PIN.  
To modify the PIN, select Modify and [Select].  
Enter old PIN and validate.  
Enter new PIN twice and validate.  
To activate or deactivate the PIN, select the Check PIN menu and [Select].  
Enter PIN and validate.  
Select Activate or Deactivate and validate.  
Settings  
37  
 
       
PIN2 number  
You have a second PIN number to allow you to access certain functions*.  
* These functions may or may not be available depending on your SIM card.  
Proceed as above in order to activate, deactivate or modify PIN number 2 of your phone.  
Phone code  
The Phone code menu allows you to activate the phone code so that it is requested and checked whenever the phone is  
switched on if a different SIM card is used. This code is automatically linked to the SIM card installed when the phone is  
activated, for example to protect the phone if stolen.  
Select [Check] and [Select].  
Enter 0000 (the factory code, by default) and validate.  
Select Activate or Deactivate and validate.  
To modify the phone code, select Modify and validate.  
Enter old phone code and validate.  
Enter new phone code and validate.  
Enter phone code again to confirm it and validate.  
Confidentiality  
This menu allows the activation or deactivation of automatic deletion, after power off/on, of outgoing calls, messages stored  
or organizer events.  
Select Activate or Deactivate and validate.  
Operator  
This menu allows you to modify the call barring.  
Access to this service depends on your type of subscription.  
38  
Settings  
 
       
Call barring  
This menu allows you to block the sending or receiving of certain calls.  
Before you can use this service, a password will be provided by your operator when you take out your subscription.  
Access to this service depends on your subscription type.  
To activate call barring :  
-
-
-
Select incoming or outgoing calls.  
Select the call type on which you want to activate call barring.  
Select:  
either All,  
or If roaming, if you are away from your home country and if roaming is available, only incoming calls will be blocked.  
-
Select Activation and enter password.  
Fixed dialling  
This menu allows you to restrict the outgoing calls.  
The availability of this menu depends on your SIM.  
Enter PIN2 number and validate.  
Select Activate or Deactivate and validate.  
Proceed as for any other phonebook.  
When activating this function, only the numbers stored in the phonebook can be called.  
This phonebook is linked to the SIM card, and its size depends on the card's capacity.  
Cost  
This menu allows you to control the cost of your calls (*).  
The Cost menu (*) lets you check the cost of the last call you made and of all the calls you made since you last deleted them.  
The Delete costs menu (*) lets you delete the cost of your last call and reset the cost counter after entering your PIN 2 code.  
(*) WARNING  
Depending on how the networks and associated subscription cards are configured, some functions may be unavailable (these  
are marked out with *).  
Settings  
39  
 
     
Networks  
This menu allows you to configure network preferences.  
Choose Preferred to view all the pre-registered networks.  
Choose Selection to activate (automatically or manually) one of the networks accessible in the area in which your are located.  
Choose Network type to select your network: GSM-DCS or PCS (depending on model).  
Choose GPRS to select the way you want to be attached on the GPRS network: always, or only when needed (when  
launching a data connection).  
Shortcuts  
This menu allows you to customize the settings of your phone to make it as convenient as possible for you to use.  
(Function available depending on model)  
This menu allows you to allocate functions to the programmable keys:  
Select the key that you wish to modify and validate.  
.
Choose the function that you want to allocate to this key and validate.  
Date / Time  
Set Date/Time  
This menu allows you to set the date and time of your phone.  
Automatic update  
This menu allows you to choose manual or automatic updating of date and time (after switch off of your phone or when going  
abroad for instance) (service depending on the operator).  
Please select Automatic, Manual or On demand and press [Select].  
Display  
This menu allows you to select the date and time display.  
In the list that appears, select the desired display type between: Analog, Digital, None and validate.  
40  
Settings  
 
     
Time zone  
This menu allows you to change time in relation to the GMT time.  
Choose the time of the country desired by calculating the time from the GMT time.  
Summer time  
This menu allows you to set your phone to the summer/winter time.  
Select 1 h, 2 h Summer time or Winter time depending on the season, and validate.  
WAP settings  
This menu allows you to set various parameters needed for WAP connection (see chapter WAP).  
Help  
This menu allows you to activate or deactivate the display of the help in the phone.  
Multimedia display  
This menu allows you to select the display type of the pictures, videos and sounds list in the Multimedia menu.  
They can be displayed as a matrix way or as a list way.  
Storage  
This menu allows you to select where the sounds, pictures, videos or applications downloadings will be stored (phone  
memory or miniSD™ card.  
Contacts list  
This menu allows you to select the default phonebook (phone or SIM card) displayed when the phone switches on.  
Player settings  
Play options: to play the musics one by one or in a continuous way.  
Player priority: to give priority to phone (in case of incoming call) or to playing music.  
Settings  
41  
 
     
Conformance Document  
42  
Conformance Document  
 
Care and safety information  
SAR  
THIS MODEL MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES  
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves  
recommended by international guidelines. These guidelines were developed by the independent scientific organization  
ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.  
The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices  
is 2 W/kg and the highest SAR value for this device when tested at the ear was 0.97 W/kg (*). As mobile devices offer a range  
of functions, they can be used in other positions, such as on the body as described in this user guide (**).  
As SAR is measured utilizing the devices highest transmitting power the actual SAR of this device while operating is typically  
below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the  
minimum level required to reach the network.  
The World Health Organization has stated that present scientific information does not indicate the need for any special  
precautions for the use of mobile devices. They note that if you want to reduce your exposure then you can do so by limiting  
the length of calls or using a 'hands-free' device to keep the mobile phone away from the head and body. Additional  
Information can be found on the websites of the World Health Organization (http://www.who.int/emf)  
Advice for limiting exposure to radiofrequency (RF) fields  
For individuals concerned about limiting their exposure to RF fields, the World Health Organization (WHO) provides the  
following advice:  
Precautionary measures: Present scientific information does not indicate the need for any special precautions for the use of  
mobile phones. If individuals are concerned, they might choose to limit their own or their children’s’ RF exposure by limiting  
the length of calls, or using "hands-free" devices to keep mobile phones away from the head and body.  
2000.  
(*) The tests are carried out in accordance with international guidelines for testing.  
(**) Please see the Safety section about body worn operation.  
Care and safety information  
43  
 
 
Safety  
Never attempt to disassemble your phone. You alone are responsible for how you use your phone and any consequences of  
its use.  
As a general rule, always switch off your phone wherever the use of a phone is prohibited.  
Use of your phone is subject to safety measures designed to protect users and their environment.  
Do not use your phone in damp areas (bathroom, swimming pool…). Protect it from liquids and other moisture.  
Do not expose your phone to extreme temperatures lower than - 10°C an higher than + 55°C.  
The physicochemical processes created by chargers impose temperature limits when charging the battery. Your phone  
automatically protects the batteries in extreme temperatures.  
Do not leave your phone within the reach of small children (certain removable parts may be accidentally ingested).  
Electrical safety  
Only use the chargers listed in the manufacturer’s catalogue. Using any other charger may be dangerous; it would also  
invalidate your warranty. Line voltage must be exactly the one indicated on the charger’s serial plate.  
Aircraft safety  
When travelling by plane, you will need to switch your phone off when so instructed by the cabin crew or the warning signs.  
Using a mobile phone may be dangerous to the operation of the aircraft and may disrupt the phone network.  
Its use is illegal and you could be prosecuted or banned from using cellular networks in the future if you do not abide by these  
regulations.  
Explosive materials  
Please comply with warning signs at petrol station asking you to switch your phone off. You will need to comply with radio  
equipment usage restrictions in places such as chemical plants, fuel depots and at any location where blasting operations  
are under way.  
Electronic equipment  
To avoid the risk of demagnetisation, do not let electronic devices close to your phone for a long time.  
Electronic medical equipment  
Your phone is a radio transmitter which may interfere with electronic medical equipment or implants, such as hearing aids,  
pacemakers, insulin pumps, etc. It is recommended that a minimum separation of 15 cm be maintained between the phone  
and an implant. Your doctor or the manufacturers of such equipment will be able to give you any advice you may need in this  
area.  
Hospitals  
Always make sure that your phone is switched off in hospitals when so instructed by warning signs or by medical staff.  
44  
Care and safety information  
 
 
Road safety  
Do not use your phone when driving. In order to give your full attention to driving, stop and park safely before making a call.  
You must comply with any current legislation.  
Body worn operation  
For body worn operation, this phone has been tested and meets RF exposure guidelines when used with an accessory that  
contains no metal and that positions the handset a minimum of 1.5 cm from the body. Use of other accessories may not  
ensure compliance with RF exposure guidelines.  
Care and safety information  
45  
 
End User Licence Agreement (EULA), for the  
software  
CONTEXT AND ACCEPTATION OF THE AGREEMENT  
You have acquired a Mobile Phone device ("DEVICE"), manufactured by Sagem Communication (SAGEM), that includes  
software either developed by SAGEM itself or licensed third party Software suppliers ("SOFTWARE COMPANIES") to  
SAGEM with the rights to sub-license it to the purchaser of the device. Those installed software products whatever their  
company of origin, and wherever the name of the company of origin is indicated of not in the DEVICE documentation, as well  
as associated media, printed materials, and "online" or electronic documentation ("SOFTWARE") are protected by  
international intellectual property laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved.  
IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT ("EULA"), DO NOT USE THE DEVICE OR COPY  
THE SOFTWARE. INSTEAD, PROMPTLY CONTACT SAGEM FOR INSTRUCTIONS ON RETURN OF THE UNUSED  
DEVICE(S) FOR A REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE,  
WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT)  
.
SOFTWARE includes software already installed on the DEVICE ("DEVICE Software") and Software contained on the CD-  
ROM disk ("Companion CD"), if any is supplied with the product.  
GRANT OF SOFTWARE LICENCE  
This EULA grants you the following licence:  
DEVICE Software You may use the DEVICE Software as installed on the DEVICE. All or certain portions of the DEVICE  
.
Software may be inoperable if you do not have and maintain a service account with an appropriate Mobile Operator, or if the  
Mobile Operator's network facilities are not operating or configured to operate with the DEVICE software.  
COMPANION CD. If any is supplied, additional software for your personal computer is included with your DEVICE. You may  
install and use the software component(s) contained in the Companion CD only in accordance with the terms of the printed  
or online end user license agreement(s) provided with such component(s). In the absence of an end user license agreement  
for particular component(s) of the Companion CD, you may install and use only one (1) copy of such component(s) on the  
DEVICE or a single computer with which you use the DEVICE.  
Security Updates. The SOFTWARE may include digital rights management technology. If SOFTWARE does contain digital  
rights management technology, content providers are using the digital rights management technology ("DRM") contained in  
the SOFTWARE to protect the integrity of their content ("Secure Content") so that their intellectual property, including  
copyright, in such content is not misappropriated. Owners of such Secure Content ("Secure Content Owners") may, from  
time to time, request manufacturers or SOFTWARE SUPPLIERS to provide security related updates to the DRM components  
of the SOFTWARE ("Security Updates") that may affect your ability to copy, display and/or play Secure Content through the  
SOFTWARE or third party applications that utilise the DRM.  
46  
End User Licence Agreement (EULA), for the software  
 
You therefore agree that, if you elect to download a licence from the Internet which enables your use of Secure Content,  
Suppliers may, in conjunction with such licence, also download onto your DEVICE such Security Updates that a Secure  
Content Owner has requested that SOFTWARE SUPPLIERS distribute. SAGEM and SOFTWARE SUPPLIERS will not  
retrieve any personally identifiable information, or any other information, from your DEVICE by downloading such Security  
Updates.  
DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS  
COPYRIGHT All title and intellectual property rights in and to the SOFTWARE (including but not limited to any images,  
.
photographs, animations, video, audio, music, text and "applets," incorporated into the SOFTWARE), the accompanying  
printed materials, and any copies of the SOFTWARE, are owned by SAGEM or the SOFTWARE SUPPLIERS. You may not  
copy the printed materials accompanying the SOFTWARE. All title and intellectual property rights in and to the content which  
may be accessed through use of the SOFTWARE is the property of the respective content owner and may be protected by  
applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such content. All  
rights not specifically granted under this EULA are reserved by SAGEM and the SOFTWARE SUPPLIERS  
Limitations on Reverse Engineering, Decompilation and Disassembly You may not reverse engineer, decompile, or  
.
disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law  
notwithstanding this limitation.  
Single DEVICE. The DEVICE Software is licensed with the DEVICE as a single integrated product. The DEVICE Software  
installed in the memory of the DEVICE may only be used as part of the DEVICE.  
Single EULA. The package for the DEVICE may contain multiple versions of this EULA, such as multiple translations and/or  
multiple media versions (e.g., in the user documentation and in the software). Even if you receive multiple versions of the  
EULA, you are licensed to use only one (1) copy of the DEVICE Software.  
Software Transfer  
.
You may not permanently transfer any of your rights under this EULA with regard to the DEVICE  
Software or Companion CD, except as permitted by the applicable Mobile Operator. In the event that the Mobile Operator  
permits such transfer, you may permanently transfer all of your rights under this EULA only as part of a sale or transfer of the  
DEVICE, provided you retain no copies, you transfer all of the SOFTWARE (including all component parts, the media and  
printed materials, any upgrades , this EULA and, if applicable, the Certificate(s) of Authenticity), and the recipient agrees to  
the terms of this EULA. If the SOFTWARE is an upgrade, any transfer must include all prior versions of the SOFTWARE.  
Software Rental You may not rent or lease the SOFTWARE.  
.
Speech/Handwriting Recognition. If the SOFTWARE includes speech and/or handwriting recognition component(s), you  
should understand that speech and handwriting recognition are inherently statistical processes; that recognition errors are  
inherent in the processes; and that errors can occur in the component's recognition of your handwriting or speech, and the  
final conversion into text.. Neither SAGEM nor its suppliers shall be liable for any damages arising out of errors in the speech  
and handwriting recognition processes.  
End User Licence Agreement (EULA), for the software  
47  
 
NOTICE REGARDING THE MPEG-4 VISUAL STANDARD  
.
The SOFTWARE may include MPEG-4 visual decoding  
technology. MPEG LA, L.L.C. requires the following notice:  
USE OF THIS SOFTWARE IN ANY MANNER THAT COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED,  
EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR INFORMATION (i) GENERATED BY AND OBTAINED  
WITHOUT CHARGE FROM A CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE, AND (ii) FOR  
PERSONAL USE ONLY; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA, L.L.C.  
If you have questions regarding this Notice, please contact MPEG LA, L.L.C., 250 Steele Street, Suite 300, Denver, Colorado  
80206; Telephone 303 331.1880; FAX 303 331.1879  
Termination. Without prejudice to any other rights, SAGEM may terminate this EULA if you fail to comply with the terms and  
conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE and all of its component parts.  
Consent to Use of Data You agree that SOFTWARE SUPPLIERS may collect and use technical information gathered in  
.
any manner as part of product support services related to the SOFTWARE. SOFTWARE SUPPLIERS may use this  
information solely to improve their products or to provide customised services or technologies to you. SOFTWARE  
SUPPLIERS may disclose this information to others, but not in a form that personally identifies you.  
Internet Gaming/Update Features If the SOFTWARE provides, and you choose to utilise, the Internet gaming or update  
.
features within the SOFTWARE, it is necessary to use certain computer system, hardware, and software information to  
implement the features. By using these features, you explicitly authorise SOFTWARE SUPPLIERS to use this information  
solely to improve their products or to provide customised services or technologies to you. SOFTWARE SUPPLIERS may  
disclose this information to others, but not in a form that personally identifies you.  
Internet-Based Services Components The SOFTWARE may contain components that enable and facilitate the use of  
.
certain Internet-based services. You acknowledge and agree that SOFTWARE SUPPLIERS may automatically check the  
version of the SOFTWARE and/or its components that you are utilising and may provide upgrades or supplements to the  
SOFTWARE that may be automatically downloaded to your Device.  
Links to Third Party Sites The SOFTWARE may provide you with the ability to link to third party sites through the use of  
.
the SOFTWARE. The third party sites are not under the control of SAGEM. Neither SAGEM nor its affiliates are responsible  
for (i) the contents of any third party sites, any links contained in third party sites, or any changes or updates to third party  
sites, or (ii) webcasting or any other form of transmission received from any third party sites. If the SOFTWARE provides links  
to third party sites, those links are provided to you only as a convenience, and the inclusion of any link does not imply an  
endorsement of the third party site by SAGEM or its affiliates.  
Additional Software/Services The SOFTWARE may permit SAGEM to provide or make available to you SOFTWARE  
.
updates, supplements, add-on components, or Internet-based services components of the SOFTWARE after the date you  
obtain your initial copy of the SOFTWARE ("Supplemental Components").  
If SAGEM provides or makes available to you Supplemental Components and no other EULA terms are provided along with  
the Supplemental Components, then the terms of this EULA shall apply.  
SAGEM reserves the right to discontinue any Internet-based services provided to you or made available to you through the  
use of the SOFTWARE.  
48  
End User Licence Agreement (EULA), for the software  
 
EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is subject to U.S. export jurisdiction. You agree to comply  
with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration  
Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other governments.  
UPGRADES AND RECOVERY MEDIA  
-
DEVICE Software. If the DEVICE Software is provided by SAGEM separate from the DEVICE on media such as a ROM  
chip, CD ROM disk(s) or via web download or other means, and is labelled "For Upgrade Purposes Only", you may install  
one copy of such DEVICE Software onto the DEVICE as a replacement copy for the existing DEVICE Software and use it  
in accordance with this EULA, including any additional EULA terms accompanying the upgrade DEVICE Software.  
-
COMPANION CD If any Companion CD component(s) is provided by SAGEM separate from the DEVICE on CD ROM  
.
disk(s) or via web download or other means, and labelled "For Upgrade Purposes Only" , you may (i) install and use one  
copy of such component(s) on the computer(s) you use to exchange data with the DEVICE as a replacement copy for the  
existing Companion CD component(s).  
RESPONSIBILITIES  
SUPPORT AND INFORMATION Should you have any questions concerning this EULA, or if you desire to contact SAGEM  
]for any other reason, please refer to the address provided in the documentation for the DEVICE.  
NO LIABILITY FOR CERTAIN DAMAGES. EXCEPT AS PROHIBITED BY LAW, SAGEM SHALL HAVE NO LIABILITY FOR  
ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM OR IN CONNECTION WITH  
THE USE OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS  
OF ITS ESSENTIAL PURPOSE.  
FOR APPLICABLE LIMITED WARRANTIES AND SPECIAL PROVISIONS PERTAINING TO YOUR PARTICULAR  
JURISDICTION, PLEASE REFER TO YOUR WARRANTY BOOKLET INCLUDED WITH THIS PACKAGE OR PROVIDED  
WITH THE SOFTWARE PRINTED MATERIALS.  
SAGEM is a trademark of SAFRAN.  
T9™ Text Input is a trademark of ©Tegic Communications Inc.  
Java and all Java based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S.  
and other countries.  
The WAP navigator and some message softwares (i-mode) are under licence Openwave.  
The WAP navigator and the softwares included are the exclusive property of Openwave. For this reason, it is forbidden to  
modify, translate, disassemble or even decompile all or part of these softwares.  
Wellphone™ and SmartCom™ are registered trademarks owned by SmartCom SARL France.  
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.  
TM  
microSD is a trade mark of SD Card Association.  
End User Licence Agreement (EULA), for the software  
49  
 
Java™  
WARNING: When running a Java™ application, you may be prompted to grant access to protected features. These  
features are protected because using them could incur you cost, or involve your personal data. Read the security  
popup message carefully, to understand what feature is requested, and decide whether it is legitimate for the  
application to perform it. In case of doubt, don't hesitate to refuse access by selecting the "No" button!  
The security configuration menu is an expert feature! You must know exactly what you are doing before attempting  
to change security parameters of a MIDlet. Misunderstanding changes may render MIDlet non functional  
and/or lead to higher risks for your private data or impact your airtime consumption. Any changes in the  
security configuration are done under your responsibility. In no case shall Sagem Communication and/or your  
network provider be liable for any damages deriving from or arising out of such changes in the security  
configuration.  
You must be aware that applications downloaded to your phone could cause the phone to perform actions for which  
you will be billed, like making calls and sending SMS. Depending on your operator's billing policy, you may also be  
charged to download the application because of airtime consumption.  
Security considerations  
Java™ MIDP technology is an efficient way to provide powerful applications in mobile phones. It allows use, by "over the air"  
downloaded applications or games, of the great features built-in in a mobile phone (SMS sending and receiving, multimedia  
playback and recording, network access…).  
All these MIDP 2.0 features cannot be simply exposed to any MIDlet installed in the handset: a careful access control system  
is implemented in the device to protect your private data and airtime consumption.  
Access controls are gathered in 9 security groups:  
-
-
-
-
-
-
-
-
Network access (GPRS/GSM data airtime consumption, HTTP/web connections…)  
Auto invocation (MIDlet can wake up at a given time or when receiving a SMS)  
Phone call (ability to initiate a phone call)  
Local connectivity (IrDA or serial interfaces use by the MIDlet)  
Messaging receive (SMS,SMS-CB interception by a MIDlet)  
Messaging sending (SMS sending by a MIDlet)  
Read User data (Subscriber identity, Phonebook, Agenda read access from a MIDlet)  
Write User data (New phonebook or agenda entry)  
50  
Java™  
 
-
Multimedia recording (ability to control camera or microphone from a MIDlet)  
According to the security status of an installed MIDlet (see below), each of these security groups has one among 5 possible  
authorizations levels (listed from the more restrictive to the more permissive):  
-
-
-
Never  
The security group completely prevents access to the protected features.  
Per use  
Each time MIDlet tries to use protected feature, user is prompted to grant access.  
Per session  
First time a MIDlet uses a protected function, user is prompted to grant access like in "Per use" authorization but access  
is granted until the MIDlet terminates.  
Single confirmation  
-
-
The first time in the whole MIDlet life a MIDlet uses a protected feature, user is prompted to grant access. It remains valid  
until the MIDlet is removed from the handset.  
Always  
The security group unconditionally grants access to protected features.  
A MIDlet has a security status which is either "uncertified", or else "certified".  
An "uncertified" status means that the source of the MIDlet could not be verified by the mobile phone at installation time. As  
far as the phone knows, the MIDlet could have been written by anyone.  
A "certified" status means that the MIDlet was digitally signed by a known party, whose name is displayed by the mobile  
phone. This means that the mobile phone successfully authenticated the named party as the source of the MIDlet.  
Security permissions are different for "uncertified" or "certified" MIDlets, and may be different for different sorts of named  
parties. Usually "uncertified" security permisions are more restrictive than "certified" ones.  
Security configuration menu  
When a MIDlet is installed in the mobile phone, default security authorizations are applied.  
This default security configuration may be altered through the "Settings/Security" menu of an installed MIDlet.  
Once in the "Security" menu, the security status of the MIDlet is displayed (see "Security considerations" paragraph above).  
If you do not want to enter the security menu, simply select "Back" button.  
You can proceed by selecting "Ok" button.  
The menu displayed allows you to increase or decrease permissions currently applied to the current MIDlet for each of the  
security groups.  
Java™  
51  
 
When you set a more permissive authorization to a security group than the current value, mobile phone asks you to  
confirm your increased risk exposure.  
The maximum risk exposure increase is limited by the security status. Depending of the manufacturing configuration, it  
means, for example, that "Net Access" security group authorization cannot be set to a permissive value higher that "Session"  
for an "uncertified" MIDlet ("Single confirmation" and "Always" are unavailable in the security configuration menu) but an  
operator "certified" MIDlet may have all permission values available without any limitations.  
What is Java™?  
Java™ is a new technology enabling use of powerful applications in the mobile phone area. Business  
applications and games are easily downloadable by the end-user on a Java™ featured handset.  
Your mobile phone is a MIDP 2.0 compliant Java™ platform which implements WMA (SMS support)  
and MMAPI (Multimedia support) options, providing an exciting environment to run highly graphical,  
networked and intuitive MIDP applications.  
Such applications may be, for example, a wide range of games and appealing applications like action  
and logic games, agenda, e-Mail reader, Web browser…  
What is a MIDlet?  
A Java™ application or a game designed to run in a mobile phone is named a MIDlet (MIDP applet).  
A MIDlet is usually made of 2 files:  
-The JAD file  
-The JAR file  
JAD file stands for  
J
ava™  
A
pplication  
Descriptor. It is a small file describing the content of a JAR file  
(version, vendor name, size…) and displayed by the mobile phone. JAD file size is usually less than  
2 kilo-bytes large.  
JAR file stands for  
J
ava™  
Archive. It refers to the application data themselves (program, images, sound). A JAR file may  
be up to 200 kilo-bytes large.  
NOTE: In rare circumstances, MIDlet vendors may provide no JAD file and the MIDlet is the JAR file alone. In such a case it  
is your only responsibility to evaluate the risk to download the JAR file without possibility of consulting the JAD file.  
Downloading a MIDlet (Java™ game or application)  
MIDlets are easily downloaded in the mobile phone through the Games or Applications menus or through the WAP browser.  
In almost all cases, you will first receive a JAD file which will be displayed on the screen.  
Much care must be given in examining the content of the file as explained further.  
When you select a JAD file, your mobile phone downloads it, displays data contained and prompts you to acknowledge the  
JAR file download.  
52  
Java™  
 
The popup displays information below:  
-
-
-
-
-
-
Name of the MIDlet  
Version  
Size (JAR file size)  
Vendor name  
Security status (IMPORTANT: see "Security considerations" paragraph below)  
JAR file URL.  
If you do not want to download the main data (JAR file), you shall refuse to acknowledge further airtime consumption by  
selecting "Cancel" (JAR file is not downloaded).  
If you agree on the MIDlet installation, just select "Ok". The MIDlet is installed with security levels set to default values  
associated with its security status.  
Before downloading an application, such a message may appear: "Your handset cannot identify the application, please be  
sure of the source of the application before installing the application".  
You shall read carefully the next two paragraphs to fully understand Java™ MIDP security concerns.  
Trademarks  
Java™ and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and  
other countries.  
Disclaimer  
As explained hereabove, some downloaded items may contain data or may induce actions which may cause malfunctioning  
of your mobile phone or loss or corruption of data or abnormal increase of your airtime consumption.  
YOU EXPRESSLY ACKNOWLEDGE THAT THE DOWNLOAD OF ANY APPLICATIONS INCLUDING JAVA  
APPLICATIONS OR GAMES IS DONE UNDER YOUR EXCLUSIVE RESPONSIBILITY. IN NO EVENT SHALL  
SAGEM COMMUNICATION, YOUR NETWORK SERVICE PROVIDER OR THEIR AFFILIATES BE LIABLE FOR ANY  
LOST PROFITS OR COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, LOSS OF PROFITS,  
INTERRUPTION OF BUSINESS, LOSS OF DATA OR FOR ANY SPECIAL, INDIRECT, INCIDENTAL, ECONOMIC, OR  
CONSEQUENTIAL DAMAGES ARISING UNDER CONTRACT, TORT, NEGLIGENCE, OR OTHER THEORY OF LIABILITY  
RELATING TO THE DOWNLOAD OF ANY APPLICATION BY ANY MEANS, INCLUDING JAVA APPLICATIONS OR  
GAMES IN SAGEM DEVICES. YOU EXPRESSLY ACKNOWLEDGE THAT ANY APPLICATIONS INCLUDING JAVA  
APPLICATIONS OR GAMES ARE PROVIDED STRICTLY "AS IS". SAGEM COMMUNICATION AND/OR YOUR NETWORK  
SERVICE PROVIDER EXTEND NO WARRANTY WHATSOEVER THERETO. SAGEM COMMUNICATION AND/OR YOUR  
NETWORK SERVICE PROVIDER DISCLAIM ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY OF  
MERCHANTABILITY, FITNESS OF ANY APPLICATIONS INCLUDING JAVA APPLICATIONS OR GAMES FOR  
SPECIFIC PURPOSE, SATISFACTORY QUALITY, SECURITY OR OTHERWISE.  
A
Java™  
53  
 
Troubleshooting  
It is impossible to switch the phone on  
Remove and replace the battery.  
If you still cannot switch the phone on, charge the battery:  
-
-
-
-
-
Put it on charge for at least 15 minutes before switching it back on again.  
Check if the battery icon is scrolling up and down.  
If so, the phone is charging.  
If not, please take the charger out and put it back on again. Please check that the charging icon is scrolling up and down.  
If you still cannot switch the phone on, please disconnect the charger, put it back on again and please repeat that  
manipulation several times.  
If the charging icon is still not scrolling up and down, please contact your after-sales services.  
When the charging icon has stopped scrolling up and down, the battery is charged.  
-
-
SIM not present  
Check if the SIM card is present and properly positioned / inserted.  
Check the condition of the SIM card. If damaged, please go back to the operator's shop for advice. Contact your after-sales  
service if the message persists.  
Incorrect PIN code  
An incorrect PIN code has been entered. Be careful! Three incorrect PIN codes will block the SIM Card.  
SIM BLOCKED  
You have entered three incorrect PIN codes.  
Enter your PUK code to unblock your SIM Card.  
You must enter: **05*PUK*PIN*PIN#  
You must enter the PUK code (Personal Unblocking Key) given by your network provider.  
10 errors will permanently block your SIM Card. You must then contact your network provider to get a new one.  
SIM LOCKED  
In certain cases, the handset can only be used with some types of SIM cards. This message means that the SIM card you  
are using does not fit with the phone. Take the SIM card out, and switch it back on. If the message SIM not present  
appears on the screen, you will need to check its compatibility next to the place where you bought it. If not, please contact  
your after-sales service.  
54  
Troubleshooting  
 
 
No call connection  
Check that the number you have dialled is correct.  
If the letter R is displayed on the top right corner of the screen, without any network name displayed, only emergency  
services can be called.  
Check the status of your credit.  
Check that the SIM Card you are using offers the service you are requesting; check if its validity has not expired.  
Check and deactivate the outgoing calls restriction when necessary.  
The network could be saturated. Try later.  
If the problem persists, please contact your Technical Helpdesk.  
No receiving calls  
Try to make a call in order to check that the phone and the network are operational.  
Check and deactivate the permanent call forwarding (permanent call forwarding icon displayed on the screen).  
Check and deactivate the incoming calls restriction when necessary.  
If the problem persists, please contact your Technical Helpdesk.  
Quality reception when calling  
Avoid placing your fingers on the top of the phone, where the aerial is integrated: the phone will have to use full strength to  
establish a quality transmission.  
Impossible to send message  
Check that the message centre number is correctly entered.  
To do so, please select the menu Messages, select Options, select MSG centre n° and check the number entered.  
Please contact your network provider to get this number.  
No voicemail  
Check that your subscription does offer this service.  
Program the call to be forwarded to voicemail using the information provided by the operator.  
Try to make a call to check that phone and network are operational.  
Check if the voicemail number is properly configured. To do so, go to the Settings/Calls menu, select Voicemail and  
check the number. Otherwise, enter your operator’s voicemail number.  
Operator name does not appear on screen  
Go into the Settings menu, select Networks, then Selection. Wait until the operator appears, select it and validate.  
If the Operator logo is present (depending on model), activate the display (Settings/Display/Operator logo).  
How can I increase the efficiency of my phone?  
Activate the eco mode (see Settings/Display/ Energy saving).  
Troubleshooting  
55  
 
 
Warranty  
You must always use your phone for the purpose for which it was designed, under normal operating conditions. Sagem  
Communication declines all responsibility for any use outside of the scope of its designed purpose and for any consequences  
of this use.  
The software program developed by SAGEM remains the exclusive property of Sagem Communication. It is therefore highly  
prohibited to modify, translate, de-compile or disassemble this software program or any part thereof.  
Usage precautions  
Your phone allows you to download ring tones, icons and animated screensavers. Some of these items may contain data that  
may cause malfunctions of your phone or data losses (virus for example).  
For this reason, Sagem Communication rejects all responsibility concerning (1) the reception of downloaded data or losses  
of the said data, (2) the impact on the operation of the phone and (3) damages resulting from receiving the said downloaded  
data or loss of said data. In addition, Sagem Communication states that a failure caused by receiving downloaded data that  
do not comply with the specifications set by Sagem Communication is excluded from the warranty. Consequently, the  
diagnosis and repair of a phone infected by the said downloaded data will be at the expense of the customer.  
Any content that you download to your phone may be protected by copyright belonging to third parties and consequently you  
may not have the right to use this content or its use may be restricted. Consequently it is up to you to ensure that you have  
permission, such as under the terms of a license agreement, to use any content that you download. Furthermore, Sagem  
Communication does not guarantee the accuracy nor the quality of any content that you download. You alone are responsible  
for the content that you download to your mobile phone and how you use it. Sagem Communication cannot be held  
responsible for this content nor for its use.  
It is your responsibility to ensure compliance, at your own expense, with the laws and regulations applicable in the country  
where you use your phone.  
Warranty conditions  
Whenever you wish to make use of the warranty, please contact your vendor and present him with the purchasing paperwork  
that he gave you.  
If a fault occurs, he will advise you.  
1.  
The new phone (excluding consumables), including new accessories bundled with the phone, are guaranteed by Sagem  
Communication, parts and labour (apart from travel) against any manufacturing fault for a period of twelve (12) months with  
effect from the sale of the phone to the customer, on presentation of the paperwork stating the purchase date of the phone.  
Phones that have been repaired or replaced as standard during the warranty period stated above are guaranteed (parts and  
labour) until the later of these two dates:  
56  
Warranty  
 
 
Expiry of the guarantee period of twelve (12) months stated above or three (3) months with effect from the date of support  
provided by Sagem Communication.  
Your legal rights under the terms of applicable national law as well as your rights in relation to your retailer, as set out in the  
sales contract, remain applicable and are not in any way affected by this guarantee.  
In any disputes, the phone is covered by the legal warranty against the consequences of faults or hidden defects in  
compliance with articles 1641 and subsequent of the French civil code.  
2.  
All faulty phones under warranty will be replaced or repaired free of charge at Sagem Communication's option (with the  
exclusion of repair of any other damage), once it has been specified that the work required for the application of the warranty  
will be done in a workshop and that the return costs (transport and insurance) of the phone to the address to be indicated to  
it by the Sagem Communication after-sales service, whose phone number will appear on the delivery note, will be charged  
to the customer.  
Subject to essential legal provisions, Sagem Communication does not accept any warranty, explicit or implicit, other than the  
warranty provided expressly in this chapter, nor shall Sagem Communication accept responsibility for any immaterial and/or  
indirect damages (such as loss of orders, loss of profit or any other financial or commercial damage) under the warranty or not.  
3.  
The acceptance of a phone under warranty demands that a purchase document that is legible and without modi-fication,  
stating vendor's name and address, date and place of purchase, type of phone and IMEI, are attached to the warranty, and  
that the information on the phone identification label is legible and that this label or any other seal has not been tampered with.  
The warranty applies in normal conditions of use.  
Prior to sending the phone for repair, it is the customer's responsibility to backup at his expense the customized data stored  
in the phone (phonebook, settings, wallpapers). A list of backup facilities can be provided by Sagem Communication on  
request. The responsibility of Sagem Communication cannot be invoked if damage occurs to customer files, programs or  
data. The information or operating elements and the contents of files will not be re-installed in any case in the event of loss.  
Sagem Communication may decide, at its option, to repair the phone with new or reconditioned parts, replace the phone with  
a new phone or, in any dispute, a phone in good working condition. During its work Sagem Communication reserves the  
facility to make, where necessary, any technical modifications to the phone where these modifications doe not adversely  
affect its initial purpose.  
Faulty parts to be replaced during a repair under warranty will become the property of Sagem Communication.  
The phone repair and standstill time during the warranty period may not lead to an extension of the warranty period as stated  
in article 1 above, provided no other vital provisions have been agreed.  
The application of the warranty is subject to the full payment of the sums due for the phone when the request for support is  
made.  
Warranty  
57  
 
4.  
The following are excluded from the warranty:  
Breakdowns or malfunctions due to non-compliance with the installation and use instructions, to an external cause of the  
phone (shock, lightning, fire, vandalism, malice, water damage of any type, contact with various liquids or any harmful agent,  
unsuitable electric current...), to modifications of the phone made without the written consent of Sagem Communication, to a  
servicing fault, as described in the documentation supplied with the phone, to lack of supervision or care, to poor  
environmental conditions of the phone (especially temperature and hygrometry, effects of variations in electric voltage,  
interference from the mains network or earth) or even due to a repair, a call-out (opening or trying to open the phone) or to  
servicing done by personnel not approved by Sagem Communication.  
Damage resulting from inadequate packaging and/or poor packing of the phone sent back to Sagem Communication.  
Normal wear and tear of the phone and accessories.  
Communication problems linked with a poor environment, especially:  
Problems accessing and/or logging onto the Internet, such as breakdowns of the access network, the failure of the  
subscriber's or his correspondent's line, transmission fault (poor geographic coverage by radio transmitters, interference,  
disturbance, fai-lure or poor quality of phone lines...), a fault inherent to the local network (cabling, file server, user phone)  
and/or transmission network fault (interference, disturbance, failure or poor quality of the network...).  
Change of parameters of the cellular network made after the phone was sold.  
Supply of new software versions.  
Current servicing work: delivery of consumables, installation or replacement of these consumables...  
Call-outs for phone or software modified or added without the written consent of Sagem Communication.  
Faults or disruptions resulting from the use of products or accessories not compatible with the phone.  
Phones returned to Sagem Communication without having complied with the return procedure specific to the phone cove-red  
by this warranty.  
The opening or closing of a SIM operator key and call-outs resulting in the non-operation of the phone resulting from the  
opening or closing of SIM operator key done without the agreement of the original operator.  
5.  
In the cases of warranty exclusion and of expiry of the warranty period, Sagem Communication shall draw up an estimate to  
be given to the customer for acceptance before any call-out. The repair and carriage costs (there and back) given in the  
accepted estimate will be charged to the customer.  
These provisions are valid unless a special written agreement has been made with the customer. If one of the provisions turns  
out to infringe a legally essential rule that consumers could have the benefit of under the national legislation, this provision  
will not be applied, but all other provisions will remain valid.  
58  
Warranty  
 
Customer care  
France  
0 892 701 799 (0,34 /mn)  
0870 24 05 613  
01805 843 850  
91 375 3376  
United Kingdom  
Germany  
Spain  
Italy  
800 800 485  
Poland  
0801 801 101  
Netherlands  
Belgium  
Austria  
Switzerland  
Ireland  
020 65 45 724  
02 62 77 016  
01 36 02 77 16 64  
02 25 67 53 99  
0 160 58 355  
Portugal  
Sweden  
Denmark  
Czech Republic  
Brazil  
Slovakia  
Hungary  
Russia  
21 316 41 35  
08 519 923 21  
0 82 33 28 52  
855 555 600  
0 800 891 6247  
(421) 02 68 629 355  
06 1 7774 839  
095 258 54 33  
Customer Care e-mail address: [email protected]  
Web sites:  
Customer care  
59  
 
 
Index  
Contacts  
8, 24  
31  
A
Converter  
Cost  
Accessories  
Activating your phone  
Alarm  
3
8
30  
36  
39  
Currencies  
Customer care  
31  
59  
Anonymous mode  
D
B
Date / Time  
Display  
40  
33  
Battery  
Charging the battery  
Installing the battery  
Beeps  
Bluetooth  
Business card  
12  
5
33  
E
Energy saving  
34  
39  
20, 22, 24  
14  
F
Fixed dialling  
C
G
Calculator  
Calendar  
Call barring  
Calls  
31  
32  
39  
10  
Games  
Getting started  
Ghosts  
GPRS  
29  
8
23  
28  
Calls (menu)  
Automatic redial  
Call forward  
Call waiting  
Counters  
Display number  
View last calls  
Camera  
36  
35  
H
Hands-free mode  
Help  
10  
41  
36  
36  
36  
I
35  
Icon  
7
20, 35  
25  
Idle screen  
Infrared  
Input modes  
IrDA  
7
24  
Car kit  
Confidentiality  
Connectivity  
Contact  
38  
24  
16  
20, 22, 24  
13, 20  
13  
L
Call  
Delete  
Mailing list  
Modify  
14  
Languages  
Local information  
35  
19  
15  
14  
60  
Index  
 
M
S
Memory  
19  
23  
Safety information  
Screensaver  
Security  
43  
34  
Memory card  
Messages  
Compose SMS  
Drafts  
37  
16  
18  
Sentbox  
18  
Serial cable  
Serial speed  
Shortcut keys  
Silent mode  
SIM card  
SMS  
24  
Inbox  
Outbox  
18  
25  
18  
40  
Receiving messages  
Templates  
MMS  
17  
33  
18  
5, 8  
16  
20, 22  
26  
Music player  
Sound  
Sounds  
24  
23, 33  
N
T
Navigator  
Necklace  
Network  
Networks  
4
5
T9  
16  
30  
9
Timer  
40  
To Do  
24  
ToDo  
30  
O
Troubleshooting  
54, 55  
Operator  
Operator logo  
Organiser  
38  
34  
24  
U
USB cable  
24  
P
V
Phone code  
Phonebook  
Memory  
38  
Vibrate  
Video  
33  
41  
22, 23, 24, 35  
14  
Voicemail  
Volume  
37  
33  
New contact  
Using the phonebook  
Photo  
13  
13  
W
20, 24, 35  
WAP  
27, 28  
28  
Picture  
23, 24  
37  
Downloading objects  
WAP logging off  
WAP logging on  
WAP settings  
Warranty  
PIN number  
PIN2 number  
Programmable keys  
28  
38  
4
28  
41  
R
56  
Recorder  
Ring tones  
33  
33  
Wellphone  
Wellphone CD  
24  
3
Index  
61  
 
Mobile Communication Business Group  
Le Ponant de Paris - 27, rue Leblanc - 75512 PARIS CEDEX 15 - FRANCE  
Société Anonyme  
Capital 300 272 000 - 480 108 158 RCS PARIS  
 

Rockford Fosgate Stereo Amplifier 351M User Guide
Rubbermaid Stereo System 5M16 User Guide
Runco Home Theater System VHD 4402 User Guide
Salton Stereo System SD8SR User Guide
Samsung Automobile Accessories SC X205L User Guide
Samsung Bluetooth Headset GT B7510 User Guide
Samsung Microwave Oven SMH9151 User Guide
Samsung Washer Dryer WF B105NV C S User Guide
Savin Printer 3799 User Guide
Schneider Electric Computer Drive 58 TRX User Guide