Renesas Computer Hardware M38C59T RLFS User Guide

M38C59T-RLFS  
Emulator MCU Board for 38C5 Group  
User’s Manual  
Keep safety first in your circuit designs!  
z Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products  
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to  
personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with  
appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention  
against any malfunction or mishap.  
Notes regarding these materials  
z These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited  
to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to  
Renesas Technology Corporation, Renesas Solutions Corporation or a third party.  
z Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of  
any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application  
examples contained in these materials.  
z All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information  
on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and  
Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that  
customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product  
distributor for the latest product information before purchasing a product listed herein. The information described here may contain  
technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no  
responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information  
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home  
page (http://www.renesas.com).  
z When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and  
algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the  
information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any  
damage, liability or other loss resulting from the information contained herein.  
z Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under  
circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions  
Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any  
specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.  
z The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or  
reproduce in whole or in part these materials.  
z If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from  
the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport  
contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.  
z Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the  
products contained therein.  
Precautions to be taken when using this product  
z This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your  
program you have finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing  
integration test, evaluation, or some experiment else.  
z In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.  
z Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge.  
However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any  
circumstances.  
z This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not  
fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when  
used in Japan.  
If the requirements shown in the "CAUTION" sentences are ignored,  
the equipment may cause personal injury or damage to the products.  
CAUTION  
Renesas Tools Homepage http://www.renesas.com/en/tools  
Rev.1.00  
January 16, 2004  
(1/4)  
REJ10J0415-0100Z  
 
5. Oscillator Circuit (See Figure 3)  
This product has two oscillator circuit patterns for the main clock XIN and sub-clock XCIN.  
Select one of them according to the oscillator circuitry of the target system.  
(1) When using the internal oscillator circuit of the MCU:  
The oscillator circuit on the target system may not oscillate because a converter board is used between the emulator MCU and the  
target system. In this case, set the jumper switch to INT and mount an oscillator circuit on the M38C59T-RLFS’s oscillator  
circuit pattern. When using the oscillator circuit on the target system, be sure to set the jumper switch to EXT.  
(2) When using an oscillator module IC etc. (self-oscillation):  
It is not necessary to mount an oscillator circuit on the M38C59T-RLFS’s oscillator circuit pattern.  
TP2  
TP3 TP1  
GND  
VCC RESET  
+
C5  
CN1, CN2  
IC1  
VCC  
CN2-5a(VCC)  
R1  
RESET*  
XOUT  
CN2-2a(RESET*)  
XCIN  
XCOUT  
XIN  
CN2-3a(P60)  
CN2-2b(P61)  
CN2-4a(XIN)  
CN2-4b(XOUT)  
JP3  
JP4  
JP1  
JP2  
EXT  
INT  
EXT  
INT  
EXT  
INT  
EXT  
INT  
CN2-3b(VSS)  
R3  
R4  
C4  
R2  
C2  
C3  
C1  
X1  
X2  
Figure 3 Oscillator circuit diagram  
6. Oscillator Circuit Pattern  
JP1 XIN  
JP2 XOUT  
INT  
JP3 XCIN  
JP4 XCOUT  
INT  
INT  
EXT  
EXT  
R2  
INT  
EXT  
C3  
EXT  
X1  
For 2-terminal oscillator  
For 3-terminal oscillator  
X2  
R3  
R4  
C1  
C2  
C4  
Figure 4 Oscillator circuit pattern  
(3/4)  
 
7. Precautions  
IMPORTANT  
Notes on This Product:  
z We cannot accept any request for repair.  
z When using the oscillator circuit on the M38C59T-RLFS, check the output waveform of pins XOUT and XCOUT by an  
oscilloscope.  
z When mounting an oscillator circuit on the M38C59T-RLFS, make sure that 2 mm or more of a DIP pin does not  
appear on the rear face (solder side). It may be short-circuited with the DIP pin of the converter board.  
z For inquiries about the product or the contents of this manual, contact your local distributor.  
Renesas Tools Homepage  
8. External Dimensions  
64.0  
R1  
RESET GND  
VCC  
+
C5  
R6R5  
C6  
Unit: mm  
Figure 5 External dimensions  
9. Connecting to the Target System  
M38C59T-RLFS  
80-pin 0.8-mm-pitch  
M3T-F160-80LCC  
80-pin 0.5-mm-pitch  
M3T-F160-80LCC  
80-pin LCC  
80-pin LCC  
(0.8-mm-pitch)  
(0.8-mm-pitch)  
M3T-80LCC-DMS  
(Optional)  
M3T-80LCC-DMS  
(Optional)  
M3T-FLX100-T  
(Optional)  
M3T-FLX100-R M3T-FLX100-T  
M3T-FLX100-R  
(Optional)  
(Optional)  
(Optional)  
LCC socket  
(Optional)  
M3T-FLX-80NRA  
80-pin QFP  
M3T-FLX-80NSD  
80-pin LQFP  
(Optional)  
(Optional)  
Figure 6 Connecting to the target system  
(4/4)  
 

Radio Shack Speaker 40 1426 User Guide
RCA CRT Television 24F650T User Guide
RIDGID Drill R83001 User Guide
RIDGID Saw R3203 1 User Guide
Roland Musical Instrument SRX 12 User Guide
Samsung Air Conditioner SH09BPH User Guide
Sanyo Battery Charger HR 3URS User Guide
Sanyo VCR SRC 800A User Guide
Seagate Computer Accessories ST32000641AS User Guide
Sears Air Compressor 91915033 User Guide