Renesas Computer Hardware M34553T PTCB User Guide

M34553T-PTCB  
Converter Board for 48-pin 0.5-mm-pitch LQFP (4553 Group)  
User’s Manual  
Keep safety first in your circuit designs!  
z Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products  
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to  
personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with  
appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention  
against any malfunction or mishap.  
Notes regarding these materials  
z These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited  
to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to  
Renesas Technology Corporation, Renesas Solutions Corporation or a third party.  
z Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of  
any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application  
examples contained in these materials.  
z All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information  
on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and  
Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that  
customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product  
distributor for the latest product information before purchasing a product listed herein. The information described here may contain  
technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no  
responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information  
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home  
page (http://www.renesas.com).  
z When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and  
algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the  
information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any  
damage, liability or other loss resulting from the information contained herein.  
z Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under  
circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions  
Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any  
specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.  
z The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or  
reproduce in whole or in part these materials.  
z If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from  
the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport  
contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.  
z Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the  
products contained therein.  
Precautions to be taken when using this product  
z This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your  
program you have finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing  
integration test, evaluation, or some experiment else.  
z In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.  
z Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge.  
However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any  
circumstances.  
z This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not  
fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when  
used in Japan.  
If the requirements shown in the "CAUTION" sentences are ignored,  
the equipment may cause personal injury or damage to the products.  
CAUTION  
Renesas Tools Homepage http://www.renesas.com/en/tools  
Rev.1.00  
(1/4)  
03.09.01  
REJ10J0132-0100Z  
 
5. Connection Procedure (See Figure 3)  
3. Mount the NQPACK048SD.  
4. Attach the YQPACK048SD on the NQPACK048SD.  
5. Secure the four corners of the YQPACK048SD with the  
YQ-GUIDE's.  
M34553T-PTCA  
(5)  
M34553T-PTCB  
z Do NOT use the screws included with the  
YQPACK048SD for securing it.  
z Do NOT use the driver included with the  
NQPACK048SD for securing the YQ-GUIDE’s. It is  
used for securing the HQPACK048SD.  
(4)  
Use a flat blade driver.  
(3)  
YQ-GUIDE’s (x4)  
YQPACK048SD  
These corners are not round.  
6. Attach the M34553T-PTCB to the YQPACK048SD.  
7. Connect the M34553T-PTCA converter board to the  
M34553T-PTCB.  
(2)  
NQPACK048SD  
(1)  
Before using the M34553T-PTCB, be sure to read "7.  
Precautions" on page 4.  
48-pin 0.5-mm-pitch  
(48P6Q-A) foot pattern  
Target system  
: No. 1 pin position  
Be sure to align the pin.  
Figure 3 Connection procedure of the M34553T-PTCB  
6. External Dimensions and a Sample Foot Pattern (see Figure 4)  
35  
25  
36  
RENESAS  
M34553T-PTCB REV.A  
10  
35  
0.5  
6.5  
MADE IN JAPAN  
1
12  
0.5  
0.25  
28  
Unit: mm  
Figure 4 External dimensions and a sample foot pattern  
(3/4)  
 
7. Precautions  
CAUTION  
Cautions to Be Taken for Handling This Product:  
Be sure to align the pins when connecting the M34553T-PTCB.  
Do not apply excessive stress to the M34553T-PTCB main unit.  
To attach the M34553T-PTCB, be sure to use the YQ-GUIDE’s included with this product.  
Do not use the screws included with the YQPACK048SD for securing it.  
IMPORTANT  
Regarding This Product:  
We cannot accept any request for repair.  
For purchasing the NQPACK048SD, YQPACK048SD and HQPACK048SD, contact the following:  
Tokyo Eletech Corporation  
For inquiries about this product or the contents of this manual, contact your local distributor.  
8. Correspondence of Connectors J1, J2  
Table 2 lists the correspondence of the M34553T-PTCB and NQPACK.  
Table 2 Correspondence of the M34553T-PTCB and NQPACK  
Pin number of  
connector J1  
Pin number of  
connector J1  
NQPACK  
Signal  
NQPACK  
Signal  
1
2
3
4
5
6
7
8
41  
42  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
NC  
SEG12  
SEG13  
XIN  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
NC  
45  
46  
47  
48  
1
2
3
4
5
NC  
D5/INT  
P20/SEG17  
P21/SEG18  
P22/SEG19  
P23/SEG20  
P00/SEG21  
P01/SEG22  
P02/SEG23  
P03/SEG24  
P10/SEG25  
P11/SEG26  
P12/SEG27  
P13/SEG28  
D0  
XOUT  
CNVSS  
XCIN/D6  
XCOUT/D7  
RESET*  
COM0  
COM1  
COM2  
COM3  
SEG0/VLC3  
SEG1/VLC2  
SEG2/VLC1  
SEG3  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
43  
44  
D1  
D2  
D3  
D4  
SEG4  
SEG5  
SEG6  
SEG7  
SEG8  
SEG9  
SEG10  
SEG11  
NC  
D5/INT  
C/CNTR  
VDD  
VSS  
SEG14  
SEG15  
(NC: No connection)  
(4/4)  
 

Radio Shack Answering Machine TAD 1027 User Guide
RCA Handheld TV MR13401, M14300, M19401, M20300, CR14401, CR20401 User Guide
Reebok Fitness Treadmill RCTL097070 User Guide
Rival Slow Cooker 3140 User Guide
Ruby Tech Switch ES 1126C D User Guide
Samsung Stereo System AH68 00935B User Guide
Samsung Vacuum Cleaner DJ68 00518A User Guide
Sanyo Heat Pump KHS1822 User Guide
Seagate Computer Drive 100529372 User Guide
Seagate Computer Drive ST9900805FC User Guide