Renesas Computer Hardware M30100 User Guide

M30100T-PTC  
Converter Board for M30100  
User's Manual  
Keep safety first in your circuit designs!  
• Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more  
reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property  
damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive,  
auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.  
Notes regarding these materials  
• These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to the customer's  
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation,  
Renesas Solutions Corporation or a third party.  
• Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of any third-party's rights,  
originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.  
• All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the  
time of publication of these materials, and are subject to change by Renesas Technology Corporation and Renesas Solutions Corporation without notice  
due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation, Renesas Solutions  
Corporation or an authorized Renesas Technology product distributor for the latest product information before purchasing a product listed herein. The  
information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions  
Corporation assume no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information  
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home page (http://  
www.renesas.com).  
• When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure  
to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology  
Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability or other loss resulting from the information contained herein.  
• Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human  
life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product  
distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular,  
medical, aerospace, nuclear, or undersea repeater use.  
• The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or reproduce in whole or in part  
these materials.  
• If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese  
government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and  
regulations of Japan and/or the country of destination is prohibited.  
• Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the products contained therein.  
Precautions to be taken when using this product  
• This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your program you have  
finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing integration test, evaluation, or some  
experiment else.  
• In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.  
• Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge. However, this does  
not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any circumstances.  
• This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not fall under the  
application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when used in Japan.  
Renesas Tools Homepage http://www.renesas.com/en/tools  
If the requirements shown in the "CAUTION" sentences are ignored,  
the equipment may cause personal injury or damage to the products.  
CAUTION  
Rev.1.00  
September 1, 2003  
( 1 / 4 )  
REJ10J0299-0100Z  
 
5. Connection Procedure (see Figure 3)  
(1) Mount the NQPACK032SA.  
(2) Mount the YQPACK032SA on the NQPACK032SA.  
(3) Secure the four corners of the YQPACK032SA with the  
YQ-GUIDE's.  
(4) Attach the M30100T-PTC to the YQPACK032SA.  
(5) Connect the probe of the emulation pod to the M30100T-  
PTC.  
Before using the M30100T-PTC, be sure to read "7. Precau-  
tions" (page 4).  
Figure 3 Connection procedure of the M30100T-PTC  
6. External Dimensions of the M30100T-PTC and a Sample Foot Pattern (see Figure 4)  
Unit: mm  
Figure 4 External dimensions of the M30100T-PTC and a sample foot pattern  
( 3 / 4 )  
 
7. Precautions  
CAUTION  
Caution to Be Taken for This Product:  
• When connecting the M30100T-PTC, be sure to use the included YQ-GUIDE's.  
IMPORTANT  
Notes for This Product:  
• We cannot accept any request for repair.  
• For purchasing the NQPACK032SA, YQPACK032SA and HQPACK032SA, contact  
the following:  
Daimaru Kogyo Ltd.  
• For inquiries about the product or the contents of this manual, contact your local  
distributor.  
Renesas Tools Homepage http://www.renesas.com/en/tools  
8. J1 Connectors and Pins of NQPACK  
Table 2 lists the connections of the J1 connectors and the pins of the NQPACK.  
Table 2 Connections of the J1 connectors and the pins of the NQPACK  
Connector No.  
J1-1  
NQPACK  
Connector No.  
J1-26  
J1-27  
J1-28  
J1-29  
J1-30  
J1-31  
J1-32  
J1-33  
J1-34  
J1-35  
J1-36  
J1-37  
J1-38  
J1-39  
J1-40  
J1-41  
J1-42  
J1-43  
J1-44  
J1-45  
J1-46  
J1-47  
J1-48  
J1-49  
J1-50  
NQPACK  
-
-
-
J1-2  
-
J1-3  
29  
30  
31  
32  
1
13  
14  
15  
16  
-
J1-4  
J1-5  
J1-6  
J1-7  
J1-8  
-
17  
18  
-
J1-9  
-
J1-10  
J1-11  
J1-12  
J1-13  
J1-14  
J1-15  
J1-16  
J1-17  
J1-18  
J1-19  
J1-20  
J1-21  
J1-22  
J1-23  
J1-24  
J1-25  
-
2
-
-
-
-
-
3
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
-
4
5
6
7
8
9
10  
11  
12  
-
-
-
( 4 / 4 )  
 

Quatech Server ABDG SE IN5410 User Guide
Radio Shack Conference Phone ET 148 User Guide
Rotel Stereo Amplifier RA 913 User Guide
Rowenta Electric Shaver HC 190 User Guide
Ryobi Blower RY08552 User Guide
Sagem Cell Phone myX3 2 User Guide
Samsung Answering Machine 6B User Guide
Samsung Flat Panel Television 400FP 3 User Guide
Samsung Home Theater System AH68 02279R User Guide
Sanyo Washer SW 830XT User Guide